International Journal for Simulation and Multidisciplinary Design Optimization (IJSMDO)

Open Access

Optimal design of Vertical-Taking-Off-and-Landing UAV wing using multilevel approach 26

Hao Yue, David Bassir, Hicham Medromi, Hua Ding 和 Khaoula Abouzaid

网上发表： 2020年12月16日

DOI: https://doi.org/10.1051/smdo/2020020

Open Access

LSTM based Ensemble Network to enhance the learning of long-term dependencies in chatbot 25

Shruti Patil, Venkatesh M. Mudaliar, Pooja Kamat 和 Shilpa Gite

网上发表： 2020年12月04日

DOI: https://doi.org/10.1051/smdo/2020019

Open Access

Celebration of the centenary of a major scientific milestone thanks to Heinrich Barkhausen 24

Patrice Salzenstein 和 Ekaterina Pavlyuchenko

网上发表： 2020年12月01日

DOI: https://doi.org/10.1051/smdo/2020018

Open Access

Effect of face width of spur gear on bending stress using AGMA and ANSYS 23

Hardial Singh 和 Deepak Kumar

网上发表： 2020年10月22日

DOI: https://doi.org/10.1051/smdo/2020017

Open Access

The frame optimization and validation of resistance spot welding gun 22

Ji-Su Hong, Kwang-Hee Lee 和 Chul-Hee Lee

网上发表： 2020年9月25日

DOI: https://doi.org/10.1051/smdo/2020016

Open Access

Multi-attribute decision making parametric optimization in two-stage hot cascade vortex tube through grey relational analysis 21

Racharla Madhu Kumar, NVVS Sudheer 和 Katam Ganesh Babu

网上发表： 2020年9月25日

DOI: https://doi.org/10.1051/smdo/2020015

Open Access

A numerical model of elasticity for cardiovascular system that includes 2/3D displacements and deformations 20

Ayoub Azzayani

网上发表： 2020年9月11日

DOI: https://doi.org/10.1051/smdo/2020014

Open Access

Flexible rotor optimization design with considering the uncertainty of unbalance distribution 19

Shengxi Jia, Longxi Zheng 和 Qing Mei

网上发表： 2020年8月13日

DOI: https://doi.org/10.1051/smdo/2020005

Open Access

Factorial design and design of experiments for developing novel lead free solder alloy with Sn, Cu and Ni 18

Jayesh S, Jacob Elias 和 Manoj Guru

网上发表： 2020年8月10日

DOI: https://doi.org/10.1051/smdo/2020013

Open Access

Optimality and duality for nonsmooth semi-infinite E-convex multi-objective programming with support functions 17

Tarek Emam

网上发表： 2020年8月10日

DOI: https://doi.org/10.1051/smdo/2020011

Open Access

Modified election algorithm in hopfield neural network for optimal random k satisfiability representation 16

Hamza Abubakar, Shamsul Rijal Muhammad Sabri, Sagir Abdu Masanawa 和 Surajo Yusuf

网上发表： 2020年8月07日

DOI: https://doi.org/10.1051/smdo/2020008

Open Access

Preliminary investigations on extrusion of high viscosity slurry using direct writing technique 15

Ali Tesfaye Kebede, Esakki Balasubramanian, AS Praveen, Lade Rohit 和 Kumar Arvind

网上发表： 2020年8月06日

DOI: https://doi.org/10.1051/smdo/2020012

Open Access

Modeling of a square-shape ZnO, ZnS and AlN membrane for mems capacitive pressure-sensor applications 14

Ahmad Dagamseh, Qais Al-Bataineh, Zaid Al-Bataineh, Nermeen S. Daoud, Ahmad Alsaad 和 Ahmad Omari

网上发表： 2020年8月04日

DOI: https://doi.org/10.1051/smdo/2020010

Open Access

Agent-based modelling and simulation for ship unloading processes: determining the number of trucks and container cranes 13

Fadillah Ramadhan, Arif Imran, Afrin Fauzya Rizana 和 Liane Okdinawati

网上发表： 2020年8月04日

DOI: https://doi.org/10.1051/smdo/2020009

Open Access

System design for inverted pendulum using LQR control via IoT 12

Dechrit Maneetham 和 Petrus Sutyasadi

网上发表： 2020年7月28日

DOI: https://doi.org/10.1051/smdo/2020007

Open Access

Multiobjective aerodynamic shape optimization of NACA0012 airfoil based mesh morphing 11

Rabii El Maani, Soufiane Elouardi, Bouchaib Radi 和 Abdelkhalak El Hami

网上发表： 2020年7月24日

DOI: https://doi.org/10.1051/smdo/2020006

Open Access

A tabu search approach with embedded nurse preferences for solving nurse rostering problem 10

Razamin Ramli, Siti Nurin Ima Ahmad, Syariza Abdul-Rahman 和 Antoni Wibowo

网上发表： 2020年7月24日

DOI: https://doi.org/10.1051/smdo/2020002

Open Access

Cleaning cycle optimisation in non-tracking ground mounted solar PV systems using Particle Swarm Optimisation 9

K. Chiteka, R. Arora, S.N. Sridhara 和 C.C. Enweremadu

网上发表： 2020年7月14日

DOI: https://doi.org/10.1051/smdo/2020004

Open Access

Influence of geometric variables on spur gear volume 8

Edmund S. Maputi 和 Rajesh Arora

网上发表： 2020年6月23日

DOI: https://doi.org/10.1051/smdo/2020003

Open Access

Frequency and temperature control for complex system engineering in optoelectronics and electronics: an overview 7

Patrice Salzenstein

网上发表： 2020年6月09日

DOI: https://doi.org/10.1051/smdo/2020001

Open Access

CFD simulation for evaluation of optimum heat transfer rate in a heat exchanger of an internal combustion engine 6

Rajesh Kocheril 和 Jacob Elias

网上发表： 2020年2月28日

DOI: https://doi.org/10.1051/smdo/2019017

Open Access

Review

A comparative study of three new parallel models based on the PSO algorithm 5

Maria Zemzami, Norelislam El Hami, Mhamed Itmi 和 Nabil Hmina

网上发表： 2020年1月31日

DOI: https://doi.org/10.1051/smdo/2019022

Open Access

Topology optimization of steering knuckle structure 4

Saurabh Srivastava, Sachin Salunkhe, Sarang Pande 和 Bhavin Kapadiya

网上发表： 2020年1月24日

DOI: https://doi.org/10.1051/smdo/2019018

Open Access

A multi-discretization scheme for topology optimization based on the parameterized level set method 3

Peng Wei, Yang Liu 和 Zuyu Li

网上发表： 2020年1月24日

DOI: https://doi.org/10.1051/smdo/2019019

Open Access

Optimization in collaborative information systems for an enhanced interoperability network 2

Aicha Koulou, Maria Zemzami, Norelislam El Hami, Abir Elmir 和 Nabil Hmina

网上发表： 2020年1月15日

DOI: https://doi.org/10.1051/smdo/2019021

Open Access

Posture prediction and optimization for a manual assembly operation involving lifting of weights 1

Biswaranjan Rout, Rati Ranjan Dash 和 Debabrata Dhupal

网上发表： 2020年1月15日

DOI: https://doi.org/10.1051/smdo/2019020

International Journal for Simulation and Multidisciplinary Design Optimization

Volume 11 (2020)

Optimal design of Vertical-Taking-Off-and-Landing UAV wing using multilevel approach 26

LSTM based Ensemble Network to enhance the learning of long-term dependencies in chatbot 25

Celebration of the centenary of a major scientific milestone thanks to Heinrich Barkhausen 24

Effect of face width of spur gear on bending stress using AGMA and ANSYS 23

The frame optimization and validation of resistance spot welding gun 22

Multi-attribute decision making parametric optimization in two-stage hot cascade vortex tube through grey relational analysis 21

A numerical model of elasticity for cardiovascular system that includes 2/3D displacements and deformations 20

Flexible rotor optimization design with considering the uncertainty of unbalance distribution 19

Factorial design and design of experiments for developing novel lead free solder alloy with Sn, Cu and Ni 18

Optimality and duality for nonsmooth semi-infinite E-convex multi-objective programming with support functions 17

Modified election algorithm in hopfield neural network for optimal random k satisfiability representation 16

Preliminary investigations on extrusion of high viscosity slurry using direct writing technique 15

Modeling of a square-shape ZnO, ZnS and AlN membrane for mems capacitive pressure-sensor applications 14

Agent-based modelling and simulation for ship unloading processes: determining the number of trucks and container cranes 13

System design for inverted pendulum using LQR control via IoT 12

Multiobjective aerodynamic shape optimization of NACA0012 airfoil based mesh morphing 11

A tabu search approach with embedded nurse preferences for solving nurse rostering problem 10

Cleaning cycle optimisation in non-tracking ground mounted solar PV systems using Particle Swarm Optimisation 9

Influence of geometric variables on spur gear volume 8

Frequency and temperature control for complex system engineering in optoelectronics and electronics: an overview 7

CFD simulation for evaluation of optimum heat transfer rate in a heat exchanger of an internal combustion engine 6

A comparative study of three new parallel models based on the PSO algorithm 5

Topology optimization of steering knuckle structure 4

A multi-discretization scheme for topology optimization based on the parameterized level set method 3

Optimization in collaborative information systems for an enhanced interoperability network 2

Posture prediction and optimization for a manual assembly operation involving lifting of weights 1