Open Access
| Issue |
Int. J. Simul. Multidisci. Des. Optim.
Volume 12, 2021
|
|
|---|---|---|
| Article Number | 15 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/smdo/2021016 | |
| Published online | 24 August 2021 | |
- A. Karamanli, M. Aydogdu, Buckling of laminated composite and sandwich beams due to axially varying in-plane loads, Compos. Struct. 210, 391–408 (2019) [CrossRef] [Google Scholar]
- M.P. Arunkumar, M. Jagadeesh, J. Pitchaimani, K.V. Gangadharan, M.L. Babu, Sound radiation and transmission loss characteristics of a honeycomb sandwich panel with composite facings: effect of inherent material damping, J. Sound Vibr. 383, 221–232 (2016) [CrossRef] [Google Scholar]
- M. Rajesh, J. Pitchaimani, Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression, Compos. Struct. 163, 302–311 (2017) [CrossRef] [Google Scholar]
- K.S. Kumar, I. Siva, P. Jeyaraj, J.W. Jappes, S.C. Amico, N. Rajini, Synergy of fiber length and content on free vibration and damping behavior of natural fiber reinforced polyester composite beams, Mater. Des. (1980–2015) 56, 379–386 (2014) [CrossRef] [Google Scholar]
- A.S. Sayyad, Y.M. Ghugal, Bending, buckling and free vibration of laminated composite and sandwich beams: a critical review of literature, Compos. Struct. 171, 486–504 (2017) [CrossRef] [Google Scholar]
- T.P. Vo, H.T. Thai, M. Aydogdu, Free vibration of axially loaded composite beams using a four-unknown shear and normal deformation theory, Compos. Struct. 178, 406–414 (2017) [CrossRef] [Google Scholar]
- T.K. Nguyen, B.D. Nguyen, T.P. Vo, H.T. Thai, A novel unified model for laminated composite beams, Compos. Struct. 238, 111943 (2020) [CrossRef] [Google Scholar]
- P. Jeyaraj, N. Ganesan, C. Padmanabhan, Vibration and acoustic response of a composite plate with inherent material damping in a thermal environment, J. Sound Vibr. 320, 322–338 (2009) [CrossRef] [Google Scholar]
- M.A. Eltaher, S.A. Mohamed, Buckling and stability analysis of sandwich beams subjected to varying axial loads, Steel Compos. Struct. 34, 241–260 (2020) [Google Scholar]
- J. Li, X. Hu, X. Li, Free vibration analyses of axially loaded laminated composite beams using a unified higher-order shear deformation theory and dynamic stiffness method, Compos. Struct. 158, 308–322 (2016) [CrossRef] [Google Scholar]
- N.D. Nguyen, T.K. Nguyen, T.P. Vo, H.T. Thai, Ritz-based analytical solutions for bending, buckling and vibration behavior of laminated composite beams, Int. J. Struct. Stab. Dyn. 18, 1850130 (2018) [CrossRef] [Google Scholar]
- R. Chandra, S.P. Singh, K. Gupta, Damping studies in fiber-reinforced composites − a review, Compos. Struct. 46, 41–51 (1999) [CrossRef] [Google Scholar]
- P. Jeyaraj, N. Ganesan, C. Padmanabhan, Vibration and acoustic response of a composite plate with inherent material damping in a thermal environment, J. Sound Vib. 320, 322–338 (2009) [CrossRef] [Google Scholar]
- R.G. Ni, R.D. Adams, The damping and dynamic moduli of symmetric laminated composite beams − theoretical and experimental results, J. Compos. Mater. 18, 104–121 (1984) [CrossRef] [Google Scholar]
- M.S. Ozer, H. Koruk, K.Y. Sanliturk, Development of an equivalent shell finite element for modelling damped multi-layered composite structures, Compos. Struct. 254, 112828 (2020) [CrossRef] [Google Scholar]
- H. Li, Y. Niu, Z. Li, Z. Xu, Q. Han, Modeling of amplitude-dependent damping characteristics of fiber reinforced composite thin plate, Appl. Math. Model. 80, 394–407 (2020) [CrossRef] [Google Scholar]
- D.X. Lin, R.G. Ni, R.D. Adams, Prediction and measurement of the vibrational damping parameters of carbon and glass fiber-reinforced plastics plates, J. Compos. Mater. 18, 132–152 (1984) [CrossRef] [Google Scholar]
- M. Bruyneel, B. Colson, P. Jetteur, C. Raick, A. Remouchamps, S. Grihon, Recent progress in the optimal design of composite structures: industrial solution procedures on case studies, Int. J. Simul. Multidiscipl. Des. Optim. 2, 283–288 (2008) [CrossRef] [Google Scholar]
- E.H. Irhirane, J. Echaabi, M. Hattabi, M. Aboussaleh, A. Saouab, A comparative study of failure criteria applied to composite materials, Int. J. Simul. Multidiscipl. Des. Optim. 2, 141–147 (2008) [CrossRef] [Google Scholar]
- F.S. Liao, A.C. Su, T.C. Hsu, Vibration damping of interleaved carbon fiber-epoxy composite beams, J. Compos. Mater. 28, 1840–1854 (1994) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.