Open Access
Int. J. Simul. Multidisci. Des. Optim.
Volume 11, 2020
Article Number 23
Number of page(s) 8
Published online 22 October 2020
  1. A. Patil, Bending stress analysis of spur gear, Int. J. Appl. Sci. 5, 422–426 (2017) [Google Scholar]
  2. A. Sharma, M. L. Aggarwal, L. Singh, Effect of fillet radius on aluminium silicon carbide metal matrix composite spur gear, International Journal of Recent Advances in Mechanical Engineering (IJMECH) 4, 137–148 (2015) [CrossRef] [Google Scholar]
  3. S.A.N. Quadri, D.R. Dolas, Contact Stress Analysis of Involute Spur gear under Static loading, Int. J. Sci. 4, 593–596 (2015) [Google Scholar]
  4. P.S. Rao, N. Sriraj, M. Farookh, Contact Stress Analysis of Spur Gear for Different Materials using ANSYS and Hertz Equation, Int. J. Modern Studies in Mechanical Engineering. 1, 45–52 (2015) [Google Scholar]
  5. D.V. Subbarao, Y. Dilip Kumar, T. Tirupati, Computational analysis of contact stresses in involute spur gears using ANSYS, Int. J. Sci. Res. 2, 2049–2454 (2014) [Google Scholar]
  6. I. Patel, M.S. Murthy, Comparison of bending stresses for different number of teeth of spur gear obtained using MTLAB Simulink with AGMA and ANSYS, IJETT, 4, 3141–3144 (2013) [Google Scholar]
  7. S.K. Tiwari, U.K. Joshi, Stress analysis of mating involute spur gear teeth, International Journal of Engineering Research & Technology. 1, 1–12 (2013) [Google Scholar]
  8. V.V. Ambade, A.V. Vanalkar, P.R. Gajbhiye, Involute gear tooth contact and bending stress analysis, International Journal of Computational Engineering Research. 3, 30–36 (2013) [Google Scholar]
  9. A. Joshi, V.K. Karma, Effect on strength of involute spur gear by changing the fillet radius using FEA, Int. J. Eng. Res. 2, 1–5 (2011) [Google Scholar]
  10. B.R. Hohn, P. Oster, C. Brayoff, Size and material influence on the tooth root, pitting, scuffing and wear load carrying capacity of fine module gears, Gear Technology, 34–40 (2011) [Google Scholar]
  11. T. Costopoulos, V. Spitas, Reduction of gear fillet stresses by using one-sided involute asymmetric teeth, Int Mechanism and Machine Theory 44, 1524–1534 (2009) [CrossRef] [Google Scholar]
  12. S. Li, Effect of addendum on contact strength, bending strength and basic performance parameters of a pair of spur gears, Mechanism and Machine Theory 43, 1557–1584 (2008) [CrossRef] [Google Scholar]
  13. S. Kumar, D.V. Muni, G. Muthuveerappan, Profile modification, a design approach for increasing the tooth strength in spur gear, Mechanism and Machine Theory 43, 829–858 (2008) [CrossRef] [Google Scholar]
  14. Y. Wang, Optimized tooth profile based on identified gear dynamic model, Mechanism and Machine Theory 42, 1058–1068 (2007) [CrossRef] [Google Scholar]
  15. C.A. Spitas, V.A. Spitas, Generating interchangeable 20° spur gear sets with circular fillets to increase load carrying capacity, Gear Technology, 28–34 (2006) [Google Scholar]
  16. J.L. Woods, S.R. Daniewicz, R. Nellums, Increasing the bending fatigue strength of carburized spur gear teeth by presetting, International Journal of Fatigue. 21, 549–556 (1999) [CrossRef] [Google Scholar]
  17. Dudley's, “Gear hand book” 2nd ed, pp. 6.15–6.22 [Google Scholar]
  18. V. Aravind, S. Adharsh, D. Prakash, K. Babu, Stress analysis on functionally graded spur gear. in: K. Vijay Sekar, M. Gupta, A. Arockiarajan (Eds), Advances in Manufacturing Processes. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2019 [Google Scholar]
  19. T.G. Yılmaz, O. Doğan, F. Karpat, A comparative numerical study of forged bi-metal gears: Bending strength and dynamic response. Mechanism and Machine Theory, 141, 117–135 (2019) [CrossRef] [Google Scholar]
  20. Jabbour, Toni, G. Asmar, Tooth stress calculation of metal spur and helical gears. Mechanism and Machine Theory 92, 375–390 (2015) [CrossRef] [Google Scholar]
  21. W. Yu, C.K. Mechefske, M. Timusk, Influence of the addendum modification on Spur Gear Back-side Mesh Stiffness and Dynamics, Journal of Sound and Vibration, 1–19 (2016) [Google Scholar]
  22. M.B. Sánchez, M. Pleguezuelos, J.I. Pedrero, Strength model for bending and pitting calculations of internal spur gears. Mechanism and Machine Theory 133, 691–705 (2019) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.