Open Access
Int. J. Simul. Multidisci. Des. Optim.
Volume 2, Number 2, April 2008
Composite and Aircraft Materials
Page(s) 123 - 133
Published online 22 May 2008
  1. A. Guédon-Gracia, Contribution à la conception thermo-mécanique optimisée d'assemblages sans plomb, Ph.D. Thesis of Université Bordeaux 1, France (2006)
  2. A. Micol, M. Karama, O. Dalverny, C. Martin, M. Mermet-Guyennet, Reliability Design of Power Modules Using Probabilistic Approaches, Proc. of the 8th Conf. on Computational Structures Technology (12–15 September, 2006)
  3. M. Ciappa. Microelectronics Reliability 42, 653–667 (2002) [CrossRef]
  4. L. Dupont, Contribution à l'étude de la durée de vie des assemblages de puissance dans des environnements haute température et avec des cycles thermiques de grande amplitude, Ph.D. Thesis of ENS Cachan - France (June 2006)
  5. T. Lhommeau, C. Martin, M. Karama, R. Meuret, M. Mermet-Guyennet, Base-plate solder reliability study of IGBT modules for aeronautical Application, Proc. of EPE (Aalborg, 2007)
  6. F.C. Lee, J.D. van Wyk, D. Boroyevich, G.Q. Lu, Z. Liang, P. Barbosa. IEEE Circuits and Systems Magazine 2, 4–23 (2002) [CrossRef]
  7. S. Dieckerhoff, Thermal performance and advanced power electronics packages, ECPE Seminar (Nürnberg, November 09, 2006)
  8. C. Gillot, C. Schaeffer, C. Massit, L. Meysenc. IEEE Transactions on Components and Packaging Technologies 24 (2001)
  9. J.G. Bai, J.N. Calata, G.Q. Lu, Comparative Thermal and Thermomechanical Analyses of Solder-Bump and Direct-Solder Bonded Power Device Packages Having Double-Sided Cooling Capability, IEEE 0-7803-8269 (February 2004)
  10. C.M. Johnson, C. Buttay, S.J. Rashidt, F. Udreat, G.A.J. Amaratungat, P. Ireland, R.K. Malhan, Compact Double-Side Liquid-Impingement-Cooled Integrated Power Electronic Module, Proceedings of the 19th International Symposium on Power Semiconductor Devices & ICs (Jeju, Korea, May 27–30, 2007)
  11. European parliament directives concerning the use of hazardous substances http://ec.europa/environment/index_en.htm
  12. J.F. Silvain, J. Soccart, Copper matrix composite materials used for thermal management of high power electronic devices, Imaps France (La Rochelle, 2006)
  13. L.J.M.G. Dortmans, G. de With. J. Eur. Ceramic Soc. 6, 369 (1990) [CrossRef]
  14. G.Z. Wang, Z.N. Cheng, K. Beker, J. Wilde. Journal of Electronic Packaging 123 (2001)
  15. A.M. Lush, G. Weber, L. Anand. Int. J. Plasticity 5, 521 (1989) [CrossRef]
  16. M. Pei, J. Qu, Constitutive Modeling of Lead-Free Solders, School of Mechanical Engineering, Georgia Institute of Technology, 0-7803-9085 – IEEE (July 2005)
  17. J. Wilde, K. Becker, M. Thoben, W. Blum, T. Jupitz, G. Wang, Z.N. Cheng. IEEE Transactions on Advanced Packaging 23 (2000)
  18. R. Darveaux, Effect of Simulation Methodology on Solder Joint Crack Growth Correlation, 50th Electronic Components and Technology Conference (2000)
  19. M. Pillet, Les plans d'expériences par la méthode Taguchi (Les Éditions d'Organisation, Paris, 1997)
  20. A. Guédon-Gracia, P. Roux, E. Woirgard, C. Zardini. Microelectronics Reliability 44, 1331 (2004) [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.