Issue |
Int. J. Simul. Multidisci. Des. Optim.
Volume 15, 2024
Modelling and Optimization of Complex Systems with Advanced Computational Techniques
|
|
---|---|---|
Article Number | 22 | |
Number of page(s) | 12 | |
DOI | https://doi.org/10.1051/smdo/2024019 | |
Published online | 21 October 2024 |
Review
Modelling analysis and optimisation of porous structural scaffolds for human bones
1
Shandong Jianzhu University, School of Materials Science and Engineering, Jinan 250101 China
2
Jinan Engineering Polytechnic, Jinan 250200, China
3
Shandong Science and Technology Service Development Promotion Centre, 607 Shunhua Road, Jinan 250101, Shandong, China
4
Weifang Fuyuan Supercharger Co., LTD, Weifang
261206, Shandong, China
* e-mail: xsb@sdjzu.edu.cn
Received:
29
July
2024
Accepted:
3
September
2024
Two different types of unit structure models, ortho tetrahedral and hexahedral, are established, and a series of different porosities are obtained by controlling the parameters such as rod diameter and rod length, and the porous structure can be obtained by stacking the unit structure in an orderly manner in the three-dimensional space, and then finite element simulation and analysis are carried out by simulating compression experiments using Ansys to obtain the equivalent stresses, deformation maps and data, and the elastic modulus, which is close to that of the human hip bone, is calculated to investigate the mechanical properties under different porous structures and different porosities. The modulus of elasticity was calculated to be close to that of the human hip bone, and the mechanical properties were investigated under different porous structures and different porosities. The Fluent module is also used to simulate the fluid field, and the pressure and velocity maps of the fluid inside the two porous structures are obtained for comparative and comprehensive analyses. From the simulation of the created porous model, it is learnt that, for the same structure, with the increase of porosity, the equivalent force and deformation increase and the elastic modulus decreases significantly; for the same porosity, under the same loading environment, the longitudinal deformation of the hexahedron is smaller than that of the tetrahedron, its equivalent force is much lower than that of the tetrahedron, and it has suitable elastic modulus. Its strength is higher than that of the tetrahedron when under pressure. When the fluid flows in the hexahedron, the hexahedral structure is less compressed than the ortho tetrahedral structure, and the flow rate is more suitable for the blood flow rate in the human body.
Key words: Hip prosthesis / finite element analysis / additive manufacturing / porosity
© H. Xue et al., Published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.