Open Access
Issue |
Int. J. Simul. Multidisci. Des. Optim.
Volume 16, 2025
|
|
---|---|---|
Article Number | 2 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/smdo/2025001 | |
Published online | 31 January 2025 |
- X. Fan, B. Sun, W. Qu, X. Chen, X. Wang, Wrinkling and strengthening behaviors in the two-layer-sheet hot-forming-quenching integrated process for an Al-Cu-Mg-alloy thin-walled curved-surface shell, Materials (Basel) 16 (2023), https://doi.org/10.3390/ma161347661 [Google Scholar]
- M. Huang, Q. Zhou, J. Wang, S. Li, Die casting die design and process optimization of aluminum alloy gearbox shell, Materials (Basel) 14 (2021), https://doi.org/10.3390/ma141439992 [Google Scholar]
- F. Xia, H. Li, H.−g. Liu, B.−b. Zhao, Z.−q. Zhang, D.−h. Lu, J.−q. Chen, Forward hot extrusion forming process of 4-lobe aluminum alloy helical surface rotor, J. Central South Univ. 26, 2307–2317 (2019) [CrossRef] [Google Scholar]
- D. Kim, K. Park, M. Chang, S. Joo, S. Hong, S. Cho, H. Kwon, Fabrication of functionally graded materials using aluminum alloys via hot extrusion, Metals 9 (2019), https://doi.org/10.3390/met90202104 [Google Scholar]
- S. Sun, Y. Fang, L. Zhang, C. Li, S. Hu, Effects of aging treatment and peripheral coarse grain on the exfoliation corrosion behaviour of 2024 aluminium alloy using SR-CT, J. Mater. Res. Technol. 9, 3219–3229 (2020) [CrossRef] [Google Scholar]
- Q. Li, X. Zhang, L. Wang, J. Qiao, The effect of extrusion and heat treatment on the microstructure and tensile properties of 2024 aluminum alloy, Materials (Basel) 15 (2022), https://doi.org/10.3390/ma152175666 [Google Scholar]
- B. Wisner, A. Kontsos, Investigation of particle fracture during fatigue of aluminum 2024, Int. J. Fatigue 111, 33–43 (2018) [CrossRef] [Google Scholar]
- M. Araghchi, H. Mansouri, R. Vafaei, Y. Guo, Optimization of the mechanical properties and residual stresses in 2024 aluminum alloy through heat treatment, J. Mater. Eng. Perform. 27, 3234–3238 (2018) [CrossRef] [Google Scholar]
- G. Sun, S. Xiao, J. Wu, J. Zheng, J. Qin, Shaking table test and simulation on seismic performance of aluminum alloy reticulated shell structures under elastic and elastic-plastic stage, J. Build. Eng. 97, 110878 (2024) [CrossRef] [Google Scholar]
- D. Xiao, F. Yang, B.T. Le, S. Zhang, Modeling of piercing based on DEFORM-3D and the ensemble OSC-PLS-ELM method, IEEE Access. 6, 63537–63545 (2018) [CrossRef] [Google Scholar]
- S. Gneiger, N.P. Papenberg, A.R. Arnoldt, C.M. Schlogl, M. Fehlbier, Investigations of high-strength Mg-Al-Ca-Mn alloys with a broad range of Ca+Al contents, Materials (Basel) 14 (2021). https://doi.org/10.3390/ma1418543911 [CrossRef] [Google Scholar]
- X. Wang, D. Zhang, A. Li, D. Yi, T. Li, A review on traditional processes and laser powder bed fusion of aluminum alloy microstructures, mechanical properties, costs, and applications, Materials (Basel) 17 (2024). https://doi.org/10.3390/ma1711255312 [Google Scholar]
- W. Wang, J. Zhao, R. Zhai, A forming technology of spur gear by warm extrusion and the defects control, J. Manufactur. Process. 21, 30–38 (2016) [CrossRef] [Google Scholar]
- J.H. Kim, J.T. Yeom, J.K. Hong, S.Y. Shim, S.G. Lim, N.K. Park, Effect of scandium on the hot extrudability of 7075 aluminum alloy, Metals Mater. Int. 16, 669–677 (2010) [CrossRef] [Google Scholar]
- H. Zhao, Y. Cao, Y. Bai, H. Yao, C. Tian, Numerical simulation and tool parameters optimization of aluminum alloy transmission intermediate shell, Sci Rep. 14, 4241 (2024) [CrossRef] [MathSciNet] [Google Scholar]
- L. Jia, Y. Li, T. Hui, Y. Zhang, Numerical simulation and experimental research on microstructural evolution during compact hot extrusion of heavy caliber thick-wall pipe, Chin. J. Mech. Eng. 32 (2019), https://doi.org/10.1186/s10033-019-0316-z16 [Google Scholar]
- J. Jin, X. Wang, L. Deng, J. Luo, A single-step hot stamping-forging process for aluminum alloy shell parts with nonuniform thickness, J. Mater. Process. Technol. 228, 170–178 (2016) [CrossRef] [Google Scholar]
- J. Ma, Z. Han, A.K. Sachdev, A.A. Luo, The challenge and progress in macro- and micro-modeling and simulation of squeeze casting process, Metall. Mater. Trans. A (2024), https://doi.org/10.1007/s11661-024-07557-818 [Google Scholar]
- S. Wan, H. Su, B. Shao, Y. Zong, D. Shan, B. Guo, Changes in microstructure and mechanical properties of 2219 Al alloy during hot extrusion and post-extrusion aging, J. Mater. Res. Technol. 24, 3453–3463 (2023) [CrossRef] [Google Scholar]
- M.C. Santos, A.R. Machado, W.F. Sales, M.A.S. Barrozo, E.O. Ezugwu, Machining of aluminum alloys: a review, Int. J. Adv. Manufactur. Technol. 86, 3067–3080 (2016) [CrossRef] [Google Scholar]
- L. Li, R. Ma, J. Zhao, R. Zhai, Study on hot deformation behavior and bending forging process of 7075 aluminum alloy, Int. J. Precision Eng. Manufactur. 24, 729–744 (2023) [CrossRef] [Google Scholar]
- H. Ji, J. Qiao, N. Kang, X. Wang, J. Huang, Optimization of hot extrusion process parameters for 7075 aluminum alloy rims based on HyperXtrude, J. Mater. Res. Technol. 25, 4913–4928 (2023) [CrossRef] [Google Scholar]
- Z. Du, Z. Deng, X. Cui, A. Xiao, Deformation behavior and properties of 7075 aluminum alloy under electromagnetic hot forming, Materials (Basel) 14 (2021), https://doi.org/10.3390/ma1417495423 [Google Scholar]
- S.-H. Hsiang, J.-L. Kuo, An investigation on the hot extrusion process of magnesium alloy sheet, J. Mater. Process. Technol. 140, 6–12 (2003) [CrossRef] [Google Scholar]
- Y. Sun, Z. Cao, Z. Wan, L. Hu, W. Ye, N. Li, C. Fan, 3D processing map and hot deformation behavior of 6A02 aluminum alloy, J. Alloys Compd. 742, 356–368 (2018) [CrossRef] [Google Scholar]
- Z. Chen, G. Fang, J.-Q. Zhao, Formability evaluation of aluminum alloy 6061-T6 sheet at room and elevated temperatures, J. Mater. Eng. Performance 26, 4626–4637 (2017) [CrossRef] [Google Scholar]
- F. Li, H. Wu, M. Qin, Effects of processing parameters on the extrusion by continuous variable cross-section direct extrusion with 7A09 aluminium alloy, Mod. Phys. Lett. B 30 (2016), https://doi.org/10.1142/s021798491650053627 [Google Scholar]
- L. Zhao, K. Zhou, D. Tang, H. Wang, D. Li, Y. Peng, Experimental and numerical study on friction and wear performance of hot extrusion die materials, Materials (Basel) 15 (2022), https://doi.org/10.3390/ma1505179828 [Google Scholar]
- J. Gattmah, F. Ozturk, S. Orhan, Effects of process parameters on hot extrusion of hollow tube, Arab. J. Sci. Eng. 42, 2021–2030 (2017) [CrossRef] [Google Scholar]
- T. Ye, E. Xia, S. Qiu, J. Liu, H. Yue, J. Tang, Y. Wu, Deformation behavior of an extruded 7075 aluminum alloy at elevated temperatures, Materials 17 (2024), https://doi.org/10.3390/ma1705121030 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.