Issue
Int. J. Simul. Multidisci. Des. Optim.
Volume 15, 2024
Special Issue - Modelling and Optimization of Complex Systems with Advanced Computational Techniques
Article Number 11
Number of page(s) 15
DOI https://doi.org/10.1051/smdo/2024007
Published online 14 May 2024
  1. S.M. Fakhari, H. Mrad, Optimization of an axial-flow mine ventilation fan based on effects of design parameters, Res. Eng. 21, 101662 (2024) [Google Scholar]
  2. C. Tian, X. Liu, J. Wang, G. Xi, Effects of bionic blades inspired by the butterfly wing on the aerodynamic performance and noise of the axial flow fan used in air conditioner, Int. J. Refrigerat. 140, 17–28 (2022) [Google Scholar]
  3. C. Li, Q. Lin, X. Ding, X. Ye, Performance, aeroacoustics and feature extraction of an axial flow fan with abnormal blade angle, Energy 103, 322–339 (2016) [Google Scholar]
  4. V. Sushma Chinta, P. Ravinder Reddy, K. Eshwar Prasad, Investigation of shear properties of axial flow fan blade material with partial woven jute reinforcements, Mater. Today: Proc (2023). https://doi.org/10.1016/j.matpr.2023.02.426 [Google Scholar]
  5. M. Moosania, C. Zhou, S. Hu, Aerodynamics of a partial shrouded low-speed axial flow fan, Int. J. Refrigerat. 130, 208–216 (2021) [Google Scholar]
  6. D. Zhang, R. Chen, Z. Zhang, S. He, M. Gao, Crosswind influence on heat and mass transfer performance for wet cooling tower equipped with an axial fan, Case Stud. Thermal Eng. 27, 101259 (2021) [Google Scholar]
  7. Z. Dang, Z. Zhang, M. Gao, S. He, Numerical simulation of thermal performance for super large-scale wet cooling tower equipped with an axial fan, Int. J. Heat Mass Transfer 135, 220–234 (2019) [Google Scholar]
  8. K.Y. Xiao, F. Pirajno, Y. Xu, S. Zhang, L. Sun, Y. Cong et al., Study on the major minerals potential in China, Ore Geol. Rev. 127, 103816 (2020) [Google Scholar]
  9. X.Z. Xu, K.Q. Wang, Q.H. Zhang, Y.H. Yao, A comprehensive evaluation of intelligent coal mine ventilation systems in the internet of things, Human-Centric Comput. Inform. Sci. 13, 46 (2023) [Google Scholar]
  10. T.C. Yang, X.L. Chen, H.M. Cheng, Aerodynamic performance analysis of axial-fan in low pressure pipeline based on ANSYS CFX, in Proceedings of the 2015 Joint International Mechanical, Electronic and Information Technology Conference (JIMET 2015) (2015) [Google Scholar]
  11. T. Hemant Kumawat, Modeling and Simulation of Axial Fan Using CFD (2015) [Google Scholar]
  12. J. Wang, N.P. Kruyt, Computational fluid dynamics simulations of aerodynamic performance of low-pressure axial fans with small hub-to-tip diameter ratio, J. Fluids Eng. 142 (2020). doi: 10.1115/1.4047120 [Google Scholar]
  13. Y. Liu, Z. Lin, P.F. Lin, Y.Z. Jin, T. Setoguchi, H.D. Kim, Effect of inlet guide vanes on the performance of small axial flow fan, J. Thermal Sci. 26, 504–513 (2017) [Google Scholar]
  14. K.M. Munisamy, R. Govindasamy, S.K. Thangaraju, Experimental and numerical investigation onto 1250mm axial fan, in Aerotech IV: Recent Advances In Aerospace Technologies (2012) [Google Scholar]
  15. Y.J. Wu, D.G. Huang, Optimization design of axial fan blade, J. Chin. Inst. Eng. 42, 473–478 (2019) [Google Scholar]
  16. S.H. Liu, R.F. Huang, L.J. Chen, Performance and inter-blade flow of axial flow fans with different blade angles of attack, J. Chin. Inst. Eng. 34, 141–153 (2011) [Google Scholar]
  17. Z.B. Yu, Z.C. Liu, X.Y. Gao, S.X. You, Structure design of a new-style moving blade adjusted axial fan, inProceedings of the 5th International Conference on Advanced Design and Manufacturing Engineering (2015) [Google Scholar]
  18. L. Diao, F. Ge, Y. Liu, L. Yang, Y. Liu, Q. Huang, Effect of tip winglet position on tip flow and noise of axial flow fan, Heliyon 9, e18483 (2023) [Google Scholar]
  19. G.L. Podgaietsky, M.L.C. de Oliveira, C.J.L. Hermes, Model-based efficiency mapping and parametric analysis of low-pressure axial fans, Int. J. Refrigerat. 144, 136–144 (2022) [Google Scholar]
  20. R. Salcedo, A. Fonte, M. Grella, C. Garcerá, P. Chueca, Blade pitch and air-outlet width effects on the airflow generated by an airblast sprayer with wireless remote-controlled axial fan, Comput. Electr. Agric. 190, 106428 (2021) [Google Scholar]
  21. A. Pogorelov, M. Meinke, W. Schröder, Effects of tip-gap width on the flow field in an axial fan, Int. J. Heat Fluid Flow 61, 466–481 (2016) [Google Scholar]
  22. X. Ye, P. Li, C. Li, X. Ding, Numerical investigation of blade tip grooving effect on performance and dynamics of an axial flow fan, Energy 82, 556–569 (2015) [Google Scholar]
  23. S.M.A. Moghadam, M. Meinke, W. Schröder, Analysis of tip-leakage flow in an axial fan at varying tip-gap sizes and operating conditions, Comput. Fluids 183, 107–129 (2019) [Google Scholar]
  24. Y.-M. Li, Z.-N. Zhou, Investigation and numerical simulation of inner-flow of an axial mineflow fan under low flow rate conditions, J. China Univ. Mining Technol. 18, 107–111 (2008) [Google Scholar]
  25. Y. Ding, J. Wang, B. Jiang, Q. Xiao, X. Yang, L. Wu, B. Xie, Numerical investigation of the effect of blade distortion laws on the corner flow separation of the axial-flow fan, Aerospace Sci. Technol. 138, 108296 (2023) [Google Scholar]
  26. B. Luo, W. Chu, H. Zhang, Tip leakage flow and aeroacoustics analysis of a low-speed axial fan, Aerospace Sci. Technol. 98, 105700 (2020) [Google Scholar]
  27. A. Shahsavari, M. Nili-Ahmadabadi, A novel approach for the design of axial flow fan by increasing by-pass ratio in a constant-diameter turbofan, Propuls. Power Res. 9, 142–158 (2020) [Google Scholar]
  28. X. Liu, J. Liu, D. Wang, L. Zhao, Experimental and numerical simulation investigations of an axial flow fan performance in high-altitude environments, Energy 234, 121281 (2021) [Google Scholar]
  29. W. Yang, Y. Wu, S. Liu, An optimization method on runner blades in bulb turbine based on CFD analysis, Sci. China Technolog. Sci. 54, 338–344 (2011) [Google Scholar]
  30. P. Ma, J. Wang, H. Wang, Investigation of performances and flow characteristics of two bi-directional pumps with different airfoil blades, Sci. China Technolog. Sci. 61, 1588–1599 (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.