Int. J. Simul. Multidisci. Des. Optim.
Volume 13, 2022
Computation Challenges for engineering problems
Article Number 25
Number of page(s) 7
Published online 08 December 2022
  1. A. Adouni, A.J.M. Cardoso, Thermal analysis of low-power three-phase induction motors operating under voltage unbalance and inter-turn short circuit faults, Machines 9, 1–11 (2021) [Google Scholar]
  2. B. Groschup, M. Nell, F. Pauli, K. Hameyer, Characteristic thermal parameters in electric motors: comparison between induction-and permanent magnet excited machine, IEEE Trans. Energy Convers. 36, 2239–2248 (2021) [CrossRef] [Google Scholar]
  3. B. Radi, A. Makhloufi, A. El Hami, M. Sbaa, Optimization safety factors to study an ultrasonic motor, Int. J. Simul. Multidiscip. Des. Optim. 4, 71–76 (2010) [CrossRef] [EDP Sciences] [Google Scholar]
  4. D.G. Dorrell, D.A. Staton, J. Kahout, D. Hawkins, M.I. McGilp, Linked electromagnetic and thermal modelling of a permanent magnet motor, in 2006 3rd IET International Conference on Power Electronics, Machines and Drives − PEMD 2006 (2006), pp. 536–540 [Google Scholar]
  5. E. Gundabattini, R. Kuppan, D.G. Solomon, A. Kalam, D.P. Kothari, R. Abu Bakar, A review on methods of finding losses and cooling methods to increase efficiency of electric machines, Ain Shams Eng. J. 12, 497–505 (2021) [CrossRef] [Google Scholar]
  6. S. Branch, A CFD study of screw compressor motor cooling analysis, IOP Conf. Ser. Mater. Sci. Eng. 232 (2017) [Google Scholar]
  7. B. Będkowski, J. Madej, The potential of 3D FEM and CFD methods for cooling systems analysis of electrical machines − the premises, Masz. Elektr. Zesz. Probl. 1, 139–143 (2012) [Google Scholar]
  8. H. Li, Flow driven by a stamped metal cooling fan − numerical model and validation, Exp. Therm. Fluid Sci. 33, 683–694 (2009) [CrossRef] [Google Scholar]
  9. H. Li, Cooling of a permanent magnet electric motor with a centrifugal impeller, Int. J. Heat Mass Transf. 53, 797–810 (2010) [CrossRef] [Google Scholar]
  10. Y. Xie, J. Guo, P. Chen, Z. Li, Coupled fluid-thermal analysis for induction motors with broken bars operating under the rated load, Energies 11 (2018) [Google Scholar]
  11. A. Boglietti, S. Nategh, E. Carpaneto, L. Boscaglia, C. Scema, An optimization method for cooling system design of traction motors, in 2019 IEEE Int. Electr. Mach. Drives Conf. IEMDC 2019 (2019), pp. 1210–1215 [Google Scholar]
  12. W. Kelly, B. Gigas, Using CFD to predict the behavior of power law fluids near axial-flow impellers operating in the transitional flow regime, Chem. Eng. Sci. 58, 2141–2152 (2003) [CrossRef] [Google Scholar]
  13. C.-C. Chang, Y.-F. Kuo, J.-C. Wang, S.-L. Chen, Air cooling for a large-scale motor, Appl. Therm. Eng. 30, 1360–1368 (2010) [CrossRef] [Google Scholar]
  14. B.N. Murthy, N.A. Deshmukh, A.W. Patwardhan, J.B. Joshi, Hollow self-inducing impellers: flow visualization and CFD simulation, Chem. Eng. Sci. 62, 3839–3848 (2007) [CrossRef] [Google Scholar]
  15. ANSYS ICEM CFD 11.0 Tutorial Manual, Ansys, 2012. [Online]. Available:∼scalo/menu/teaching/me608/tutorial.pdf [Accessed: 18 December 2021] [Google Scholar]
  16. Standard and SST k-ω omega Models, Ansys Fluent, 2009. [Online]. Available: [Accessed 18 December 2021] [Google Scholar]
  17. ANSYS FLUENT 12.0 User's Guide − 26.18.1 Judging Convergence, Ansys (2009) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.