Open Access
Issue
Int. J. Simul. Multisci. Des. Optim.
Volume 5, 2014
Article Number A14
Number of page(s) 10
DOI https://doi.org/10.1051/smdo/2013018
Published online 10 February 2014
  1. Thompson TL. 1970. Simulation for optimal grain dryer design. Transaction of the ASAE, 1(10), 844–848. [CrossRef] [Google Scholar]
  2. Riede Th, Schlünder EU. 1991. Selective through-drying in fixed beds. Chemical Engineering and Processing: Process Intensification, 29, 9–26. [CrossRef] [Google Scholar]
  3. Saastamoinen J, Impola R. 1997. Drying of biomass particles in fixed and moving beds. Drying Technology – International Journal, 5, 1919–1929. [CrossRef] [Google Scholar]
  4. Khan JA, Beasley DE, Alatas B. 1991. Evaporation from a packed bed of porous particles into superheated vapor. International Journal of Heat and Mass Transfer, 1, 267–280. [CrossRef] [Google Scholar]
  5. Hager J, Wimmerstedt R, Whitaker S. 2000. Steam drying a bed of porous spheres: theory and experiment. Chemical Engineering Science, 55, 1675–1698. [CrossRef] [Google Scholar]
  6. Chen Z, Agarwal PK, Agnew JB. 2001. Steam drying of coal, Part 2. Modeling the operation of fluidized bed drying unit. Fuel, 80, 209–223. [CrossRef] [Google Scholar]
  7. Tang Z, Cenkowski S, Muir WE. 2004. Modeling the superheated-steam drying of a fixed bed of brewers’ spent grain. Biosystems Engineering, 87, 67–77. [CrossRef] [Google Scholar]
  8. Arnaud G, Fohr JP. 1988. Slow drying simulation in thick layers of granular products. International Journal of Heat and Mass Transfer, 31, 2517–2526. [CrossRef] [Google Scholar]
  9. Sözen M, Vafai K. 1990. Analysis of the nonthermal equilibrium condensing flow of gas through a packed bed. International Journal of Heat and Mass Transfer, 33, 1247–1261. [CrossRef] [Google Scholar]
  10. Mhimid A, Fohr JP, Ben Nasrallah S. 1999. Heat and mass transfer during drying of granular products by combined convection and conduction. Drying Technology – International Journal, 17, 1043–1063. [CrossRef] [Google Scholar]
  11. Ratti C, Mujumdar AS. 1995. Simulation of packed bed drying of foodstuffs with airflow reversal. Journal of Food Engineering, 26, 259–271. [CrossRef] [Google Scholar]
  12. Wang ZH, Chen G. 1999. Heat and mass transfer in fixed-bed drying. Chemical Engineering Science, 54, 4233–4243. [CrossRef] [Google Scholar]
  13. Kato K, Ohmura S, Taneda D, Onozawa I, Shimura K, Iijima A. 1981. Drying characteristics in a packed fluidized bed dryer. Journal Chemical Engineering Japan, 14, 365–371. [CrossRef] [Google Scholar]
  14. Izadifar M, Baik O-D, Simonson CJ. 2006. Modeling of the packed bed drying of paddy rice using the local volume averaging (LVA) approach. Food Research International, 39(6), 712–720. [CrossRef] [Google Scholar]
  15. Stakić M, Banjac M, Urošević T. 2011. Numerical study on hygroscopic material drying in packed bed. Brazilian Journal of Chemical Engineering, 28(2), 273–284. [Google Scholar]
  16. Zili L, Ben Nasrallah S. 1999. Heat and mass transfer during drying in cylindrical packed beds. Numerical Heat Transfer, Part A, 36, 201. [CrossRef] [Google Scholar]
  17. Sitompul JP, Istadi I, Widiasa IN. 2001. Modeling and simulation of deep-bed grain dryers. Drying Technology – International Journal, 19(2), 269–280. [CrossRef] [Google Scholar]
  18. Istadi I, Sitompul JP. 2002. A comprehensive mathematical and numerical modeling of deep-bed grain drying. Drying Technology International Journal, 20(6), 1123–1142. [CrossRef] [Google Scholar]
  19. Sitompul JP, Istadi I, Sumardiono S. 2003. Modeling and simulation of momentum, heat and mass transfer in a deep-bed grain dryers. Drying Technology – International Journal, 21(2), 217–229. [CrossRef] [Google Scholar]
  20. Boukadida N, Ben Nasrallah S, Perre P. 2000. Mechanism of two-dimensional heat and mass transfer during convective drying of porous media under different drying conditions. Drying Technology : An International Journal, 18, 1367–1388. [CrossRef] [Google Scholar]
  21. Kumar P, Mujumdar AS. 1990. Superheated steam drying: a bibliography. Drying Technology – International Journal, 8(1), 195–205. [CrossRef] [Google Scholar]
  22. Pronyk C, Cenkowski S. 2003. Superheated steam drying technology. Paper number RRV03-0014, an ASAE Meeting Presentation. [Google Scholar]
  23. Devahastin S, Suvarnakuta P, Soponronnarit S, Mujumdar AS. 2004. A comparative study of low-pressure superheated steam and vacuum drying of a heat-sensitive material. Drying Technology – International Journal, 22(8), 1845–1867. [CrossRef] [Google Scholar]
  24. Iyota H, Nishimura N, Onuma T, Nomura T. 2001. Drying of sliced raw potatoes in superheated steam and hot air. Drying Technology – International Journal, 19, 1411–1424. [CrossRef] [Google Scholar]
  25. Whitaker S. 1999. The Method of Volume Averaging. Kluwer: Dordrecht, The Netherlands. [CrossRef] [Google Scholar]
  26. Whitaker S. 1984. Moisture Transport mechanisms during the drying of granular porous media. Proceeding of the Fourth International Drying Symposium. Edited by Mujumdar AS, p. 31–42. [Google Scholar]
  27. Whitaker S. 1991. Improved constraints for the principle of local thermal equilibrium. Industrial and Engineering Chemistry Research, 30, 983–997. [CrossRef] [Google Scholar]
  28. Hager J, Wimmerstedt R, Whitaker S. 2000. Steam drying a bed of porous spheres: theory and experiment. Chemical Engineering Science, 55, 1675. [CrossRef] [Google Scholar]
  29. Messai S, Sghaier J, Lecomte D, Belghith A. 2007. Drying kinetics of porous spherical particle and the inversion temperature. Drying Technology – International Journal, 26, 157. [CrossRef] [Google Scholar]
  30. Sghaier J, Jomaa W, Belghith A. 2008. Superheated steam of a spherical porous particle. Journal of Porous Media, 11, 633–646. [CrossRef] [Google Scholar]
  31. Patankar SV. 1980. Numerical Heat Transfer and Fluid Flow. Hemisphere Publishing Corporation, Mc Graw Hill: Washington. [Google Scholar]
  32. Moyne C, Stemmelen D, Degiovanni A. 1990. Asymmetric drying of porous materials at high temperature: theoretical analysis and experiments. International Journal of Chemical Engineering, 30, 654. [Google Scholar]
  33. Elustondo DM, Mujumdar AS, Urbicain MJ. 2002. Optimum operating conditions in drying foodstuffs with superheated steam. Drying Technology – International Journal, 20(2), 381–402. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.