Free Access to the whole issue

International Journal for Simulation and Multidisciplinary Design Optimization

Volume 13 (2022)

Export the citation of the selected articles Export
Select all

Simulation and Optimization for Industry 4.0

Open Access

Multi objective design optimization of graphene piezoresistive MEMS pressure sensor using design of experiment 27

Meetu Nag, Bhanu Pratap and Ajay Kumar

Published online: 2022年12月23日

DOI: https://doi.org/10.1051/smdo/2022018

Open Access

Optimization of equity allocations of institutional investors: study of Moroccan case 12

Mustapha Bouchekourte and Norelislam El Hami

Published online: 2022年2月08日

DOI: https://doi.org/10.1051/smdo/2021042

Open Access

Optimization of the impact measurement of market structure on liquidity and volatility 9

Sara Rhouas, Mustapha Bouchekourte and Norelislam El Hami

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021040

Open Access

Advanced Reliability Analysis of Mechatronic Packagings coupling ANSYS^© and R 7

Hamid Hamdani, Bouchaïb Radi and Abdelkhalak El Hami

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021038

Open Access

Optimization based on electro-thermo-mechanical modeling of the high electron mobility transistor (HEMT) 2

Abdelhamid Amar, Bouchaïb Radi and Abdelkhalak El Hami

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021035

Computation Challenges for engineering problems

Open Access

Feature recognition and machine learning in finite element models through a clustering algorithm 26

Sunil Premkumar, Davidson Jebaseelan and Krishnamoorthy Annamalai

Published online: 2022年12月23日

DOI: https://doi.org/10.1051/smdo/2022011

Open Access

Air flow analysis of 20 hp three phase induction motor 25

Anuprita Bhosale, Sathyanarayanan Nandagopal, Davidson Jebaseelan, Siva Kumar Ramasami and Lenin Natesan Chokkalingam

Published online: 2022年12月08日

DOI: https://doi.org/10.1051/smdo/2022012

Open Access

Impact of human–human virus transmission in an air-conditioned room with proper ventilation system 22

Chalumuru Manas, Pusapati Laxmi Narasimha Raju, Kethavarapu Naga Bharat Kumar and Harish Rajan

Published online: 2022年11月01日

DOI: https://doi.org/10.1051/smdo/2022013

Open Access

Prediction and optimization of performance and emission characteristics of a dual fuel engine using machine learning 13

Krishnasamy Karunamurthy, Mohammed Musthafa Feroskhan, Ganesan Suganya and Ismail Saleel

Published online: 2022年2月22日

DOI: https://doi.org/10.1051/smdo/2022002

Open Access

Numerical investigation of dimple-texturing on the turning performance of hardened AISI H-13 steel 10

Ganesan Vignesh, Debabrata Barik, Samraj Aravind, Ponnusamy Ragupathi and Munusamy Arun

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021043

Open Access

Numerical simulation of crashworthiness parameters for design optimization of an automotive crash-box 3

Prabhaharan S. A., G. Balaji and Krishnamoorthy Annamalai

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021036

Open Access

Computational modeling of battery thermal energy management system using phase change materials 1

Pusapati Laxmi Narasimha Raju, Chalumuru Manas and Harish Rajan

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021034

Advances in Modeling and Optimization of Manufacturing Processes

Open Access

Optimization of the Young's modulus of woven composite material made by Raphia vinifiera fiber/epoxy 21

Alfred Kendem Djoumessi, Rodrigue Nicodème Sikame Tagne, Tido Tiwa Stanislas, François Ngapgue and Ebenezer Njeugna

Published online: 2022年10月31日

DOI: https://doi.org/10.1051/smdo/2022014

Open Access

Optimization of drilling process variables using taguchi technique for LM6 aluminium alloy 19

Sarla Rubi Charles, Udaya Prakash Jayavelu, Rajkumar Chinnaraj and Sachin Salunkhe

Published online: 2022年7月28日

DOI: https://doi.org/10.1051/smdo/2022008

Open Access

Numerical simulation of heat sinks with different configurations for high power LED thermal management 18

Thangamani Ramesh, Ayyappan Susila Praveen, Praveen Bhaskaran Pillai and Sachin Salunkhe

Published online: 2022年7月19日

DOI: https://doi.org/10.1051/smdo/2022009

Open Access

Selection of raw material supplier for cold-rolled mild steel manufacturing industry 16

Avinash G. Kamble, Pritam S. Kalos, K. Mahapatra and Vishal A. Bhosale

Published online: 2022年3月15日

DOI: https://doi.org/10.1051/smdo/2022004

Open Access

Erratum

Corrigendum to: Numerical Simulation and Experimentation of Endodontic File using Taguchi DoE 11

Pravin R. Lokhande, Sachin S. Salunkhe and Balaguru Sethuraman

Published online: 2022年1月13日

DOI: https://doi.org/10.1051/smdo/2021044

Open Access

Optimization of advanced manufacturing processes using socio inspired cohort intelligence algorithm 6

Ishaan R. Kale, Mayur A. Pachpande, Swapnil P. Naikwadi and Mayur N. Narkhede

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021033

Open Access

Intelligent art: the fusion growth of artificial intelligence in art and design 24

Xiaojun Zheng, David Bassir, Yue Yang and Zheng Zhou

Published online: 2022年11月25日

DOI: https://doi.org/10.1051/smdo/2022015

Open Access

Study of the effect of SLM energy density on residual stress and microstructure of porous bone scaffolds in cubic structures 23

Sen Zhang, Shubo Xu, Wei Zheng and Juanjuan Han

Published online: 2022年11月09日

DOI: https://doi.org/10.1051/smdo/2022016

Open Access

Increasing the waste heat absorption performance in the refrigeration system using electromagnetic effect 20

Sahadev Murlidhar Jadhav, Arulprakasajothi Mahalingam, Vikas Vasantrao Ugle and Logesh Kamaraj

Published online: 2022年8月02日

DOI: https://doi.org/10.1051/smdo/2022010

Open Access

Minimizing the variance of the coverage ratio as an approach to optimize the exchange rate risk of Brent futures contracts 17

Mustapha Bouchekourte, Sara Rhouas and Norelislam El Hami

Published online: 2022年5月19日

DOI: https://doi.org/10.1051/smdo/2022006

Open Access

Design and analysis of shell and tube heat exchanger 15

Erica Jacqueline Fernandes and Sachidananda Hassan Krishanmurthy

Published online: 2022年2月28日

DOI: https://doi.org/10.1051/smdo/2022005

Open Access

Analysis of microchannel heat exchanger based on channel geometry 14

Mohammed Faris Tahasildar and Sachidananda Hassan Krishanmurthy

Published online: 2022年2月28日

DOI: https://doi.org/10.1051/smdo/2022003

Open Access

Design of an adiabatic air conditioning package system 8

Sachin Sunil Mothiravally and Sachidananda Hassan Krishanmurthy

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021041

Open Access

Review

Literature review of bridge structure's optimization and it's development over time 5

Qasim Zaheer, Tan Yonggang and Furqan Qamar

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021039

Open Access

New multiobjective optimization algorithm using NBI-SASP approaches for mechanical structural problems 4

Samira El Moumen and Siham Ouhimmou

Published online: 2022年1月06日

DOI: https://doi.org/10.1051/smdo/2021037

International Journal for Simulation and Multidisciplinary Design Optimization

Volume 13 (2022)

Simulation and Optimization for Industry 4.0

Multi objective design optimization of graphene piezoresistive MEMS pressure sensor using design of experiment 27

Optimization of equity allocations of institutional investors: study of Moroccan case 12

Optimization of the impact measurement of market structure on liquidity and volatility 9

Advanced Reliability Analysis of Mechatronic Packagings coupling ANSYS© and R 7

Optimization based on electro-thermo-mechanical modeling of the high electron mobility transistor (HEMT) 2

Computation Challenges for engineering problems

Feature recognition and machine learning in finite element models through a clustering algorithm 26

Air flow analysis of 20 hp three phase induction motor 25

Impact of human–human virus transmission in an air-conditioned room with proper ventilation system 22

Prediction and optimization of performance and emission characteristics of a dual fuel engine using machine learning 13

Numerical investigation of dimple-texturing on the turning performance of hardened AISI H-13 steel 10

Numerical simulation of crashworthiness parameters for design optimization of an automotive crash-box 3

Computational modeling of battery thermal energy management system using phase change materials 1

Advances in Modeling and Optimization of Manufacturing Processes

Optimization of the Young's modulus of woven composite material made by Raphia vinifiera fiber/epoxy 21

Optimization of drilling process variables using taguchi technique for LM6 aluminium alloy 19

Numerical simulation of heat sinks with different configurations for high power LED thermal management 18

Selection of raw material supplier for cold-rolled mild steel manufacturing industry 16

Corrigendum to: Numerical Simulation and Experimentation of Endodontic File using Taguchi DoE 11

Optimization of advanced manufacturing processes using socio inspired cohort intelligence algorithm 6

Intelligent art: the fusion growth of artificial intelligence in art and design 24

Study of the effect of SLM energy density on residual stress and microstructure of porous bone scaffolds in cubic structures 23

Increasing the waste heat absorption performance in the refrigeration system using electromagnetic effect 20

Minimizing the variance of the coverage ratio as an approach to optimize the exchange rate risk of Brent futures contracts 17

Design and analysis of shell and tube heat exchanger 15

Analysis of microchannel heat exchanger based on channel geometry 14

Design of an adiabatic air conditioning package system 8

Literature review of bridge structure's optimization and it's development over time 5

New multiobjective optimization algorithm using NBI-SASP approaches for mechanical structural problems 4

Advanced Reliability Analysis of Mechatronic Packagings coupling ANSYS^© and R 7