Open Access
Issue
Int. J. Simul. Multidisci. Des. Optim.
Volume 4, Number 2, April 2010
Page(s) 101 - 106
DOI https://doi.org/10.1051/ijsmdo/2010013
Published online 21 July 2011
  1. H. Becker, U. Heim. Hot embossing as a method for the fabrication of polymer high aspect ratio structures, Sens. Actuators, 130-135, (2000). [Google Scholar]
  2. M. Sahli, C. Millot, C. Roques-Carmes, C. Khan Malek, T. Barriere, J-C. Gelin. Quality assessment of polymer replication by hot embossing and micro-injection moulding processes using scanning mechanical microscopy, Journal of Materials Processing Technology, 5851-5861, (2009). [Google Scholar]
  3. K.F. Leil, W.J. Li. Effects of contact-stress on hot-embossed PMMA microchannel wall profile, Microsyst. Technol, 11, 113-119, (2005). [Google Scholar]
  4. M. Sahli, C. Millot, C. Roques-Carmes, C. Khan Malek, T. Barriere, J-C. Gelin. Optimization of hot embossing demoulding for improvement of quality replication of circular grooved shapes in cycloolefin polymer, Steel Res. Int., 513-520, (2008). [Google Scholar]
  5. Y.J. Huang, L.L. James. Hot embossing in microfabrication, Parte I. Experimental. Polym. Eng. Sci. 42, 539-550, (2002). [Google Scholar]
  6. Y.J. Huang, L.L. James. Hot embossing in microfabrication, Parte I. Experimental. Polym. Eng. Sci. 42, 539-550, (2002). [Google Scholar]
  7. M. Heckele, W. Bacher, K.D. Müller. Hot embossing: the moulding technique for plastic microstrucures, Microsyst. Technol., 122-124, (1998). [Google Scholar]
  8. C.R. Lin, R.H. Chen, C. Hung. Preventing non-uniform shrinkage in open-die hot embossing of PMMA microstructures, J. Mater. Process. Technol. 140, 173-178, (2003). [CrossRef] [Google Scholar]
  9. J.H. Chang, S.Y. Yang. Gas pressurized hot embossing for transcription of micro-features, Microsyst. Technol. 10, 76-80, (2003). [CrossRef] [Google Scholar]
  10. H. Becker, U. Heim. Hot embossing as a method for the fabrication of polymer high aspect ratio structures, Sensors and Actuors A83, 130-135, (2000). [CrossRef] [Google Scholar]
  11. M. Sahli, C. Millot, C. Roques-Carmes, C. Khan Malek. Experimental analysis and numerical modelling of the forming process of polypropylene replicas of microcavities using hot embossing, Microsyst. Technol., 827-83, (2009). [Google Scholar]
  12. J.M. Li, C. Liu, J. Peng. Effect of hot embossing process parameters on polymer flow and microchanel accuracy produced without vacuum, Journal of Materials processing technology 207, 163-171, (2008). [CrossRef] [Google Scholar]
  13. D. Wang, T. Shi, J. Pan, G. Liao, Z. Tang, L. Liu. Finite element simulation and experimental investigation of forming micro-gear with Zr-Cu-Ni-Al bulk metallic glass, Journal of Materials Processing Technology 210, 684-688, (2010). [Google Scholar]
  14. Y.C. Chang, T.T. Wu, M.F. Chen, C.J. Lee, J.C. Huang, C.T. Pan. Finite element simulation of micro-imprinting in Mg-Cu-Y amorphous alloy, Materials Science and Engineering A499, 153-156, (2009). [Google Scholar]
  15. Y.C. Chang, T.T. Wu, M.F. Chen, C.J. Lee, J.C. Huang, C.T. Pan. Finite element simulation of micro-imprinting in Mg-Cu-Y amorphous alloy, Materials Science and Engineering A499, 153-156, (2009). [Google Scholar]
  16. G.R. Johnson, W.H. Cook. A constitutive model and data for metals subjected to large strains, high strainrates and high temperatures, Proc. 7th Int. Symposium on Ballistics, 541-547, (1983). [Google Scholar]
  17. G.R. Johnson, W.H. Cook. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engineering Fracture Mechanics 21, 31-48, (1985). [CrossRef] [Google Scholar]
  18. C. Roques-Carmes, N. Bodin, G. Monteil, J.F. Quiniou. Description of rough surfaces using conformal equivalent structure concept Part1 Stereological approach, Wear 248, 82-91, (2001). [CrossRef] [Google Scholar]
  19. D. Wehbi, G. Monteil, C. Roques-Carmes. Notion de rugosité de surface et méthodes de mesure, Le vide, les ocuches minces 224, 107, (1985). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.