Open Access
Issue
Int. J. Simul. Multidisci. Des. Optim.
Volume 3, Number 2, April 2009
Page(s) 356 - 362
DOI https://doi.org/10.1051/ijsmdo/2009011
Published online 24 June 2009
  1. D. J. Laser, J. G. Santiago, A review of micropumps, Journal of Micromechanics and Microengineering, 14, 35-64, (2004). [CrossRef] [Google Scholar]
  2. B. Li, Q. Chen, D.-G. Lee, J. Woolman, G. P. Carman, Development of large flow rate, robust, passive micro check valves for compact piezoelectrically actuated pumps, Sensors and Actuators A 117, 325–330, (2005). [CrossRef] [Google Scholar]
  3. N.-T. Nguyen, T.-Q. Truong, K.-K. Wong, S.-S. Ho, C. L.-N. Low, Micro check valves for integration into polymeric microfluidic devices, Journal of Micromechanics and Microengineering 14, 69–75, (2004). [CrossRef] [Google Scholar]
  4. X. Yang, C. Grosjean, Y.-C. Tai, C.-M. Ho, A mems thermopneumatic silicone rubber membrane valve, Sensors and Actuators A 64, 101–108, (1998). [CrossRef] [Google Scholar]
  5. N.-T. Nguyen, T.-Q. Truong, A fully polymeric micropump with piezoelectric actuator, Sensors and Actuators B 97, 137–143, (2004). [CrossRef] [Google Scholar]
  6. B. Wang, X. Chu, E. Li, L. Li, Simulations and analysis of a piezoelectric micropump, Ultrasonics 44, 643–646, (2006). [CrossRef] [Google Scholar]
  7. T. C. Yih, C. Wei, B. Hammad, Modeling and characterization of a nanoliter drug-delivery mems micropump with circular bossed membrane, Nanomedicine 1, 164–175, (2005). [Google Scholar]
  8. Q. Gong, Z. Zhou, Y. Yang, X. Wang, Design, optimization and simulation on microelectromagnetic pump, Sensors and Actuators 83, 200–207, (2000). [CrossRef] [Google Scholar]
  9. R. Oosterbroek, S. Schlautmann, J. Berenschot, T. Lammerink, A. van den Berg, M. Elwenspoek, Modeling and validation of flow-structure interactions in passive micro valves, in: Technical proceedings of the 1998 International Conference on Modeling and Simulation of Microsystems, 528–533, (1998). [Google Scholar]
  10. J. J. Parise, L. L. Howell, S. P. Magleby, Ortho-planar linear-motion springs, Mechanism and Machine Theory 36 1281–1299, (2001). [Google Scholar]
  11. O. Smal, B. Dehez, B. Raucent, M. De Volder, J. Peirs, D. Reynaerts, F. Ceyssens, J. Coosemans, R. Puers, Modelling, characterization and testing of an ortho-planar micro-valve, Journal of Micro - Nano Mechatronics 4 (3) (2008) 131–143. [Google Scholar]
  12. O. Smal, B. Dehez, B. Raucent, M. De Volder, J. Peirs, D. Reynaerts, F. Ceyssens, J. Coosemans, R. Puers, Modelling and characterisation of an ortho-planar micro-valve, in: S. Ratchev (Ed.), Proceedings of the IFIP TC5 WG5.5 Third International Precision Assembly Seminar (IPAS '2006), Springer, Bad Hofgastein, Austria, 315–326, (2006). [Google Scholar]
  13. O. Smal, B. Raucent, F. Ceyssens, R. Puers, M. De Volder, D. Reynaerts, Design and testing of an ortho-planar micro-valve, in: S. Ratchev (Ed.), Proceedings of the IFIP TC5 WG5.5 Fourth International Precision Assembly Seminar (IPAS '2008), Springer, Chamonix, France,75–86,(2008) . [Google Scholar]
  14. W. Meeusen, Micro Electro-Discharge Machining: Technology, Computer-Aided Design & Manufacturing and applications, Phd Thesis, KULeuven, Belgium, (2003). [Google Scholar]
  15. X. Song, D. Reynaerts, W. Meeusen, H. Van Brussel, Investigation of Micro-EDM for Silicon Microstructure Fabrication, In Proceedings of SPIE Symposium on Micromachining and Microfabrication, 729-799, (1999). [Google Scholar]
  16. H. Lorenz, M. Despont, N. Fahrni, N. LaBianca, P. Renaud, P. Vettiger, SU-8: a low-cost negative resist for MEMS, Journal of Micromechanics and Microengineering, 7, 121-124, (1997). [CrossRef] [Google Scholar]
  17. R. Feng, R.J. Farris, Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings, Journal of Micromechanics and Microengineering, 13, 80-88, (2003) [CrossRef] [Google Scholar]
  18. I. E. Idel'cik, M émento des pertes de charges, 3rd Edition, Eyrolles, (1986). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.