Issue |
Int. J. Simul. Multidisci. Des. Optim.
Volume 8, 2017
|
|
---|---|---|
Article Number | A8 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/smdo/2017001 | |
Published online | 10 February 2017 |
Research Article
Tuning PID attitude stabilization of a quadrotor using particle swarm optimization (experimental)
1
LCP, Ecole Nationale Polytechnique, Elharrach, 16200
Algiers, Algeria
2
Faculty of Technology, M’sila University, 2800
M’sila, Algeria
* e-mail: kho_moh@yahoo.fr
Received:
31
October
2016
Accepted:
3
January
2017
Proportional, Integral and Derivative (PID) controllers are the most popular type of controller used in industrial applications because of their notable simplicity and effective implementation. However, manual tuning of these controllers is tedious and often leads to poor performance. The conventional Ziegler-Nichols (Z-N) method of PID tuning was done experimentally enables easy identification stable PID parameters in a short time, but is accompanied by overshoot, high steady-state error, and large rise time. Therefore, in this study, the modern heuristics approach of Particle Swarm Optimization (PSO) was employed to enhance the capabilities of the conventional Z-N technique. PSO with the constriction coefficient method experimentally demonstrated the ability to efficiently and effectively identify optimal PID controller parameters for attitude stabilization of a quadrotor.
Key words: Quadrotor dynamic model / PID controller / Ziegler-Nichols method / Particle swarm optimization
© M. Khodja et al., Published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.