Optimization of car frontal protection system
Int. J. Simul. Multidisci. Des. Optim., 1 1 (2007) 31-37
Published online: 2007-12-12
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Experimental and numerical investigation of axial crushing behavior of hybrid sandwich pipes
Mete Onur Kaman, Serkan Erdem, Mustafa Albayrak, Mustafa Gur, Ahmet Murat Asan, Mehmet Eroglu and Ilyas BozkurtProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2026)
https://doi.org/10.1177/14644207251411781
Modeling and numerical simulation of car frontal crash test using finite element method
Driss Bendjaballah, Mohamed Sahli and Thierry BarrièreJournal of Materials Science: Materials in Engineering 20 (1) (2025)
https://doi.org/10.1186/s40712-025-00326-4
Road Safety Policy in Addis Ababa: A Vision Zero Perspective
Henok Girma AbebeSustainability 14 (9) 5318 (2022)
https://doi.org/10.3390/su14095318
Numerical simulation of crashworthiness parameters for design optimization of an automotive crash-box
Prabhaharan S. A., G. Balaji, Krishnamoorthy Annamalai, et al.International Journal for Simulation and Multidisciplinary Design Optimization 13 3 (2022)
https://doi.org/10.1051/smdo/2021036
Interactive failure criteria for glass fibre reinforced polypropylene: validation on an industrial part
Massimo Nutini and Mario VitaliInternational Journal of Crashworthiness 24 (1) 24 (2019)
https://doi.org/10.1080/13588265.2017.1389629
Analysis of the Deformation Mode and Determination of the Energy Dissipated by the Resistance Structure of the Vehicles
Adrian Soica and Stelian TarulescuApplied Mechanics and Materials 772 79 (2015)
https://doi.org/10.4028/www.scientific.net/AMM.772.79
A Theoretical Approach upon the Stiffness of Vehicle Resistance Structure Submitted to an Axial Impact
Adrian Soica, Stelian Tarulescu and Nicolae IspasApplied Mechanics and Materials 659 250 (2014)
https://doi.org/10.4028/www.scientific.net/AMM.659.250
Multi-criteria optimization of large composite parts
M. Pohlak, J. Majak, K. Karjust and R. KüttnerComposite Structures 92 (9) 2146 (2010)
https://doi.org/10.1016/j.compstruct.2009.09.039
Extremes of apparent and tap densities of recovered GFRP filler materials
J. Kers, J. Majak, D. Goljandin, et al.Composite Structures 92 (9) 2097 (2010)
https://doi.org/10.1016/j.compstruct.2009.10.003
Decomposition method for solving optimal material orientation problems
Jüri Majak and Meelis PohlakComposite Structures 92 (8) 1839 (2010)
https://doi.org/10.1016/j.compstruct.2010.01.015
Optimal material orientation of linear and non-linear elastic 3D anisotropic materials
J. Majak and M. PohlakMeccanica 45 (5) 671 (2010)
https://doi.org/10.1007/s11012-009-9262-7