Open Access
Table 4
Example of production modules.
| Modules | Operations | Module definitions | Setting |
|---|---|---|---|
| Raw transfer from initial stock to lathe |
W_RF_Pick_InitStore | This module transfers a raw part from the initial stock to the lathe chuck | Ø, n |
 W_RF_Drop_TransStrore |
|||
| W_RM_Pick_TransStore |
|||
| W_RM_Drop_Tour |
|||
| Presence control | W_RM_Control_Tour | In-situ control of the presence of raw part | % de n |
| Maching lathe − Pawn | Prog_Tour_1 | Start the machining program | Lathe |
| Cas 1 Transfer of machined part from chuck to conveyor without quality control |
W_RM_Pick_Tour | Get the machined part from the chuck and evacuate it to the accumulation table | n |
| W_RM_Drop_TransStore |
|||
| W_RF_Pick_TransStore |
|||
| W_RF_Drop_Conv |
|||
| Cas 2 Transfer of machined part from chuck to conveyor with quality control |
W_RM_Pick_Tour | Get the machined part from the chuck, put the part in the 3d scanner then evacuate the part to the accumulation table | % de n |
| W_RM_Drop_Scanner |
|||
| Prog_Frao_1 |
|||
| W_RM_Pick_Scanner |
|||
| W_RM_Drop_TransStore |
|||
| W_RF_Pick_TransStore |
|||
| W_RF_Drop_Conv |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.