Editorial board


David H. Bassir
Université de Technologie de Belfort-Montbéliard, Belfort, France
Institute of Industry Technology, Guangzhou & Chinese Academy of Sciences (IIT, GZ&CAS), Haibin Rd, Nansha District, Guangzhou, China

Zhang Weihong
Northwestern Polytechnical University, Sino-French Laboratory of Concurrent Engineering, Institute of Mechatronic Engineering, China

Associate Editors

Zhu Ji-hong, Northwestern Polytechnical University, China

Sofiane Guessasma, French National Institute for Agricultural Research, Nantes, France

Kamel Barkaoui, Conservatoire National des Arts et Métiers (CNAM), Paris, France

Journal Advisor

Jose Luis Zapico Valle, University of Oviedo, Campus de Gijón, Spain

Advisory Board Members

P. Baiocco, CNES / ESA, France
A.W. Blom, TUDelft / Stork Fokker AESP, The Netherlands
W. Chen, Northwestern University, IL, USA
E.S. de Cursi, INSA-Rouen, France
T.R. Chandrupatla, Rowan University, NJ, USA
Jiang Chao, College of Mechanical and Vehicle Engineering, Hunan University, Changsha City, China
E.J. Cramer, Boeing, USA
K. Deb, Indian Institute of Technology Kanpur, India
R. Dornberger, UAS Solothurn Northwestern Switzerland
M. El Ganaoui, Université de Lorraine, IUT Henri Poincaré de Longwy, France
M.I. Friswell, University of Bristol, UK
H.C. Gea, The Statae university of New Jersey, USA
S. Grihon, Airbus, France
S. Guessasma, INRA, France
Z. Gürdal, Delft University of Technology, The Netherlands
S. Hernández, University of a Coruña, Spain
A. El Hami, INSA-Rouen, France
S.T. Liu, Dalian University of Technology, China
J. Majak, Tallin University of technology, Estonia
P.M. Montrull, Polytechnic University of Cartagena, Spain
C.A. Mota Soares, IDMEC / IST, Technical University of Lisbon, Portugal
J.P. Pedroso, Faculdade de Ciencias da Univ. do Porto, Portugal
C. Poloni, University of Trieste, Italy
M. Klein, INTES GmbH, Stuttgart, Germany
S.D. Rajan, Arizona State University, USA
H. Rodrigues, Technical University of Lisboa, Portugal
V. Sahadevan, Atkins Aviation & Defence Systems, UK
O. Sigmund, Technical University of Denmark, Denmark
S. Taher, University of Blida, Algeria
E.G. Talbi, University of Sciences and Technologies of Lille, France
O. de Weck, MIT, USA
G. Winter, CEANI / Univ. of Las Palmas de Gran Canaria, Spain
Bo Wang, Department of Engineering Mechanics, Dalian University of Technology, China
Qi Xia, Institute and Address: Huazhong University of Science and Technology, Wuhan, China
K. Yamazaki, Kanazawa University, Japan
Jun Yan, State Key Lab. of Structural Analysis for Industrial Equip. Dept. of Engineering Mechanics, Dalian University of Technology, China
J. Zarka, CADLM, France
M. Zhou, Altair Engineering, USA