Topology optimization methods for additive manufacturing: a review
Int. J. Simul. Multidisci. Des. Optim., 14 (2023) 12
Published online: 2023-10-25
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
1604 338 (2026)
https://doi.org/10.1007/978-3-032-03698-8_28
AlSi10Mg及其复合材料增材制造研究进展：材料设计、成形及工艺调控（特邀）
王嘉庆 Wang Jiaqing, 田祺 Tian Qi, 吴文征 Wu Wenzheng and 李桂伟 Li GuiweiChinese Journal of Lasers 53 (4) 0402308 (2026)
https://doi.org/10.3788/CJL251369
(2026)
https://doi.org/10.21203/rs.3.rs-8704572/v1
Design and Prototyping of Topology‐Optimized, Additively Manufactured Lightweight Components for Space Robotic Systems: A Case Study
Stelios K. Georgantzinos, Grigorios Kostopoulos, Eleni Papadopoulou, Stefanos Voulgaris, Alexandra Tseni, Panteleimon Bakalis, Maria N. Gkara, Chara Ch. Mitropoulou, Georgios Kazakis, Alin Munteanu, Jeremi Gancet and Nikos D. LagarosAdvanced Engineering Materials (2026)
https://doi.org/10.1002/adem.202502311
Applied mathematical and computational frameworks in materials science: a comprehensive review
Gajanan M. HingangavkarNext Research 4 101224 (2026)
https://doi.org/10.1016/j.nexres.2025.101224
Recycled powders: an Eco-Design approach for Laser-Powder Bed Fusion
Michele Amicarelli, Michele Trovato, Daniele Ferrara and Paolo CicconiProcedia CIRP 136 677 (2025)
https://doi.org/10.1016/j.procir.2025.08.116
Harnessing natural polymers and nanoparticles: Synergistic scaffold design for improved wound healing
Anitha S, Nandini Robin Nadar, Srividya Shivakumar, Sharma S C, Siddharth P, Surekha Varalakshmi V, Rajesh Lenka and Rajadurai SHybrid Advances 8 100381 (2025)
https://doi.org/10.1016/j.hybadv.2025.100381
Interval-based scale-span topology optimization considering reliable manufacturing limits via the parameterized level set method and image recognition techniques
Zeshang Li, Lei Wang, Kaixuan Gu and Yaru LiuThin-Walled Structures 214 113353 (2025)
https://doi.org/10.1016/j.tws.2025.113353
Topology Optimization of Biomedical Wrist Orthosis Using Tough Photopolymer Resin
David Bassir, Sofiane Guessasma, Nadhir Lebaal, Gauthier Brunel, Axel Choquet, Franc¸ois Gleyzon, Haochen Chang, D. Bassir, J. Majak and M. ZiadE3S Web of Conferences 631 02003 (2025)
https://doi.org/10.1051/e3sconf/202563102003
Stress-Based Optimization of Components and Supports for Sinter-Based Additive Manufacturing
David Stachg, Jaco Beckmann and Jens TelgkampApplied Sciences 15 (22) 12198 (2025)
https://doi.org/10.3390/app152212198
A Concept of Equivalent Load Scheme for Easy Prediction of Structural Topology When Load Position Changes Randomly
Bogdan Bochenek and Katarzyna Tajs-ZielińskaApplied Sciences 15 (22) 12294 (2025)
https://doi.org/10.3390/app152212294
Development of a CAD–FEA Integrated Automation Add-In for DfAM-Aware Topology Optimization: A Case Study on an Additively Manufactured Pusher Duct Support Bracket for a Novel UAV Prototype
H. Kursat Celik, Ali Elham, Recep Cinar, M. Ali Erbil, Robert Entwistle, Allan E. W. Rennie and Ibrahim AkinciApplied Sciences 15 (22) 12341 (2025)
https://doi.org/10.3390/app152212341
Enhanced proportional topology optimization methods for the minimum compliance problem with volume constraints
Hui Wang, Li Zhao, Qihui Peng, Yinqi Li, Xiaojiang Shao and Xiaodan HuoJournal of the Brazilian Society of Mechanical Sciences and Engineering 47 (12) (2025)
https://doi.org/10.1007/s40430-025-05897-z
https://doi.org/10.1002/9781394306442.ch15
Adaptive Variable Design Algorithm for Improving Topology Optimization in Additive Manufacturing Guided Design
Abraham Vadillo Morillas, Jesús Meneses Alonso, Alejandro Bustos Caballero, Cristina Castejón Sisamón and Alessandro CerutiInventions 9 (4) 70 (2024)
https://doi.org/10.3390/inventions9040070
Reducing the Cost of 3D Metal Printing Using Selective Laser Melting (SLM) Technology in the Manufacture of a Drill Body by Reinforcing Thin-Walled Shell Forms with Metal-Polymers
Nickolay S. Lubimyi, Mihail Chepchurov, Andrey A. Polshin, Michael D. Gerasimov, Boris S. Chetverikov, Anastasia Chetverikova, Alexander A. Tikhonov and Ardalion MaltsevJournal of Manufacturing and Materials Processing 8 (2) 44 (2024)
https://doi.org/10.3390/jmmp8020044
Comparative Analysis of Topology Optimization Platforms for Additive Manufacturing of Robot Arms
Petar CurkovicDesigns 8 (5) 98 (2024)
https://doi.org/10.3390/designs8050098
Design, analysis and optimization of porous titanium alloys scaffolds by using additive manufacture
Xue Yang, Xiujuan Song, Guoliang Zhang, Shubo Xu, Wenming Wang, Kangwei Sun, Xiquan Ma, Siyu Sun, Yuefei Pan, Jianing Li, Guocheng Ren, Weihai Zhang, Kanak Kalita, Ranjan Kumar Ghadai and Paulo DavimInternational Journal for Simulation and Multidisciplinary Design Optimization 15 16 (2024)
https://doi.org/10.1051/smdo/2024013
Topology optimization design of microstructures with zero Poisson's ratio
Xueping Li, Jiajun Zhu, Peng Wei and Cheng SuInternational Journal for Simulation and Multidisciplinary Design Optimization 15 12 (2024)
https://doi.org/10.1051/smdo/2024011