Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

This article has been cited by the following article(s):

On the characterization of stainless steel 316L parts produced by selective laser melting

Mostafa Yakout, M. A. Elbestawi and Stephen C. Veldhuis
The International Journal of Advanced Manufacturing Technology 95 (5-8) 1953 (2018)
DOI: 10.1007/s00170-017-1303-0
See this article

Topology optimization of self-supporting structures for additive manufacturing with B-spline parameterization

Che Wang, Weihong Zhang, Lu Zhou, Tong Gao and Jihong Zhu
Computer Methods in Applied Mechanics and Engineering 374 113599 (2021)
DOI: 10.1016/j.cma.2020.113599
See this article

Innovative setup for cryogenic mechanical testing of high-strength metallic alloys

Maria Tufano, Christoph Zauner and Alexander Morasch
CEAS Space Journal 11 (3) 241 (2019)
DOI: 10.1007/s12567-019-0239-7
See this article

Geetha Palani and Karthik Kannan
1 (2022)
DOI: 10.1007/978-981-16-7377-1_1
See this article

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

Syed A.M. Tofail, Elias P. Koumoulos, Amit Bandyopadhyay, et al.
Materials Today 21 (1) 22 (2018)
DOI: 10.1016/j.mattod.2017.07.001
See this article

Simulation and validation of thermography inspection for components produced by additive manufacturing

Marta S. Carvalho, Ana P. Martins and Telmo G. Santos
Applied Thermal Engineering 159 113872 (2019)
DOI: 10.1016/j.applthermaleng.2019.113872
See this article

Review on Three-Dimensionally Emulated Fiber-Embedded Lactic Acid Polymer Composites: Opportunities in Engineering Sector

Nikit Deoray and Balasubramanian Kandasubramanian
Polymer-Plastics Technology and Engineering 57 (9) 860 (2018)
DOI: 10.1080/03602559.2017.1354226
See this article

Fully resolved numerical simulations of fused deposition modeling. Part I: fluid flow

Huanxiong Xia, Jiacai Lu, Sadegh Dabiri and Gretar Tryggvason
Rapid Prototyping Journal 24 (2) 463 (2018)
DOI: 10.1108/RPJ-12-2016-0217
See this article

Controlling the extrudate swell in melt extrusion additive manufacturing of 3D scaffolds: a designed experiment

Azizeh-Mitra Yousefi, Byran Smucker, Alex Naber, et al.
Journal of Biomaterials Science, Polymer Edition 29 (3) 195 (2018)
DOI: 10.1080/09205063.2017.1409022
See this article

Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling

Sofiane Guessasma, Sofiane Belhabib and Hedi Nouri
Polymers 11 (7) 1220 (2019)
DOI: 10.3390/polym11071220
See this article

Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate

Sofiane Guessasma, Sofiane Belhabib and Hedi Nouri
Macromolecular Materials and Engineering 304 (7) 1800793 (2019)
DOI: 10.1002/mame.201800793
See this article

Low-Roughness-Surface Additive Manufacturing of Metal-Wire Feeding with Small Power

Bobo Li, Bowen Wang, Greg Zhu, Lijuan Zhang and Bingheng Lu
Materials 14 (15) 4265 (2021)
DOI: 10.3390/ma14154265
See this article

Modeling of Layer-wise Additive Manufacturing for Part Quality Prediction

Jianjing Zhang, Peng Wang and Robert X. Gao
Procedia Manufacturing 16 155 (2018)
DOI: 10.1016/j.promfg.2018.10.165
See this article

Design for additive manufacturing – a review of available design methods and software

Anton Wiberg, Johan Persson and Johan Ölvander
Rapid Prototyping Journal 25 (6) 1080 (2019)
DOI: 10.1108/RPJ-10-2018-0262
See this article

A Review of Metal Additive Manufacturing Technologies

Mostafa Yakout, M.A. Elbestawi and Stephen C. Veldhuis
Solid State Phenomena 278 1 (2018)
DOI: 10.4028/
See this article

Additive manufacturing of ceramics and cermets: present status and future perspectives

Mainak Saha and Manab Mallik
Sādhanā 46 (3) (2021)
DOI: 10.1007/s12046-021-01685-2
See this article

Implementation of Non-Destructive Evaluation and Process Monitoring in DLP-based Additive Manufacturing

Iaroslav Kovalenko, Sylvain Verron, Maryna Garan, Jiří Šafka and Michal Moučka
Open Engineering 7 (1) 100 (2017)
DOI: 10.1515/eng-2017-0016
See this article

MK Sathyadeep, Dayanand Pai and ShyamSundar Sankar
2319 020007 (2021)
DOI: 10.1063/5.0036113
See this article

Wire Arc Additive Manufacturing of Mn4Ni2CrMo Steel: Comparison of Mechanical and Metallographic Properties of PAW and GMAW

Teresa Artaza, Alfredo Suárez, Maialen Murua, J.C. García, Iván Tabernero and Aitzol Lamikiz
Procedia Manufacturing 41 1071 (2019)
DOI: 10.1016/j.promfg.2019.10.035
See this article

Domenico Caputo, Paolo Aprea, Nicola Gargiulo and Barbara Liguori
1 (2017)
DOI: 10.1109/RTSI.2017.8065965
See this article

Deep Learning for In Situ and Real-Time Quality Monitoring in Additive Manufacturing Using Acoustic Emission

Sergey A. Shevchik, Giulio Masinelli, Christoph Kenel, Christian Leinenbach and Kilian Wasmer
IEEE Transactions on Industrial Informatics 15 (9) 5194 (2019)
DOI: 10.1109/TII.2019.2910524
See this article

Additive Manufacturing: Post Processing Methods and Challenges

Prithu Mishra, Shruti Sood, Mayank Pandit and Pradeep Khanna
Advanced Engineering Forum 39 21 (2021)
DOI: 10.4028/
See this article

Additive Manufacturing with Bioinspired Sustainable Product Design: A Conceptual Model

Hao Zhang, Jacquelyn K. Nagel, Abdulrahman Al-Qas, Evan Gibbons and Jenifer Joo-Yeon Lee
Procedia Manufacturing 26 880 (2018)
DOI: 10.1016/j.promfg.2018.07.113
See this article

A new 3D printing method based on non-vacuum electron beam technology

Shuhe Chang, Stefan Gach, Aleksej Senger, Haoyu Zhang and Dong Du
Journal of Physics: Conference Series 1074 012017 (2018)
DOI: 10.1088/1742-6596/1074/1/012017
See this article

Shape and topology optimization considering anisotropic features induced by additive manufacturing processes

Charles Dapogny, Rafael Estevez, Alexis Faure and Georgios Michailidis
Computer Methods in Applied Mechanics and Engineering 344 626 (2019)
DOI: 10.1016/j.cma.2018.09.036
See this article

Integrated component-support topology optimization for additive manufacturing with post-machining

Matthijs Langelaar
Rapid Prototyping Journal 25 (2) 255 (2019)
DOI: 10.1108/RPJ-12-2017-0246
See this article

Functionally graded materials from topology optimisation and stereolithography

Tao Liu, Sofiane Guessasma, Jihong Zhu, Weihong Zhang and Sofiane Belhabib
European Polymer Journal 108 199 (2018)
DOI: 10.1016/j.eurpolymj.2018.08.038
See this article

Additive manufacturing of metal products (Review)

V.V. Zhukov, G.M. Grigorenko and V.A. Shapovalov
Автоматическая сварка 2016 (6) 148 (2016)
DOI: 10.15407/as2016.06.24
See this article

Additive Manufacturing of Emerging Materials

Eskandar Fereiduni, Mostafa Yakout and Mohamed Elbestawi
Additive Manufacturing of Emerging Materials 55 (2019)
DOI: 10.1007/978-3-319-91713-9_3
See this article

Macro- and micro-structure designs for porous sound absorbers

Keith Attenborough
Applied Acoustics 145 349 (2019)
DOI: 10.1016/j.apacoust.2018.10.018
See this article

The manufacture of honeycomb cores using Fused Deposition Modeling

David Pollard, C. Ward, G. Herrmann and J. Etches
Advanced Manufacturing: Polymer & Composites Science 3 (1) 21 (2017)
DOI: 10.1080/20550340.2017.1306337
See this article

Additive Manufacturing, Cloud-Based 3D Printing and Associated Services—Overview

Felix Baumann and Dieter Roller
Journal of Manufacturing and Materials Processing 1 (2) 15 (2017)
DOI: 10.3390/jmmp1020015
See this article

Applications of non-destructive testing techniques for post-process control of additively manufactured parts

Q. Y. Lu and C. H. Wong
Virtual and Physical Prototyping 12 (4) 301 (2017)
DOI: 10.1080/17452759.2017.1357319
See this article

Full-Density Fused Deposition Modeling Dimensional Error as a Function of Raster Angle and Build Orientation: Large Dataset for Eleven Materials

Sherri Messimer, Tais Pereira, Albert Patterson, Maliha Lubna and Fabiano Drozda
Journal of Manufacturing and Materials Processing 3 (1) 6 (2019)
DOI: 10.3390/jmmp3010006
See this article

Experimental Characterization of SLM and EBM Cubic Lattice Structures for Lightweight Applications

G. De Pasquale, F. Luceri and M. Riccio
Experimental Mechanics 59 (4) 469 (2019)
DOI: 10.1007/s11340-019-00481-8
See this article

ARIMA-GMDH: a low-order integrated approach for predicting and optimizing the additive manufacturing process parameters

Osama Aljarrah, Jun Li, Wenzhen Huang, Alfa Heryudono and Jing Bi
The International Journal of Advanced Manufacturing Technology 106 (1-2) 701 (2020)
DOI: 10.1007/s00170-019-04315-8
See this article

Schiff base-assisted surface patterning of polylactide–zinc oxide films: generation, characterization and biocompatibility evaluation

R. Rarima, R. Asaletha and G. Unnikrishnan
Journal of Materials Science 53 (14) 9943 (2018)
DOI: 10.1007/s10853-018-2338-9
See this article

Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature

Guessasma, Belhabib and Nouri
Polymers 11 (11) 1778 (2019)
DOI: 10.3390/polym11111778
See this article

Semi-supervised Monitoring of Laser powder bed fusion process based on acoustic emissions

Vigneashwara Pandiyan, Rita Drissi-Daoudi, Sergey Shevchik, Giulio Masinelli, Tri Le-Quang, Roland Logé and Kilian Wasmer
Virtual and Physical Prototyping 16 (4) 481 (2021)
DOI: 10.1080/17452759.2021.1966166
See this article

Enhancement of pool boiling heat transfer using 3D-printed polymer fixtures

Ahmed Elkholy and Roger Kempers
Experimental Thermal and Fluid Science 114 110056 (2020)
DOI: 10.1016/j.expthermflusci.2020.110056
See this article

Recent Problems of Heat-Transfer Simulation in Technological Processes of Selective Laser Melting and Fusion

S. I. Zhavoronok, A. S. Kurbatov, L. N. Rabinskiy and Yu. O. Solyaev
High Temperature 57 (6) 916 (2019)
DOI: 10.1134/S0018151X19060178
See this article

Design for additive manufacturing process for a lightweight hydraulic manifold

Olaf Diegel, Juan Schutte, Arno Ferreira and Yuk Lun Chan
Additive Manufacturing 36 101446 (2020)
DOI: 10.1016/j.addma.2020.101446
See this article

Additive Manufacturing of a Release Agent Injection Manifold for Hot Forging

Hak-Sung Lee, Min-Kyo Jung, Eun-ah Kim, Soonho Won, Do Wock Chun and Taeho Ha
Journal of the Korean Society for Precision Engineering 38 (9) 675 (2021)
DOI: 10.7736/JKSPE.021.065
See this article

Additive Manufacturing Hybrid Processes for Composites Systems

Telmo G. Santos, J. P. Oliveira, Miguel A. Machado, et al.
Advanced Structured Materials, Additive Manufacturing Hybrid Processes for Composites Systems 129 265 (2020)
DOI: 10.1007/978-3-030-44522-5_8
See this article

3D printing of kaolinite clay ceramics using the Direct Ink Writing (DIW) technique

Carlos F. Revelo and Henry A. Colorado
Ceramics International 44 (5) 5673 (2018)
DOI: 10.1016/j.ceramint.2017.12.219
See this article

Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products

K. Abouzaid, D. Bassir, S. Guessasma and H. Yue
Mechanics of Composite Materials 56 (6) 805 (2021)
DOI: 10.1007/s11029-021-09925-6
See this article

Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance

Sofiane Guessasma, Sofiane Belhabib and Hedi Nouri
Polymer Testing 77 105924 (2019)
DOI: 10.1016/j.polymertesting.2019.105924
See this article

The role of additive technologies in the prototyping issues of design

Monica Carfagni, Lorenzo Fiorineschi, Rocco Furferi, Lapo Governi and Federico Rotini
Rapid Prototyping Journal 24 (7) 1101 (2018)
DOI: 10.1108/RPJ-02-2017-0021
See this article

A Review on Corrosion and Wear of Additively Manufactured Alloys

Peter Renner, Swarn Jha, Yan Chen, Ajinkya Raut, Siddhi G. Mehta and Hong Liang
Journal of Tribology 143 (5) (2021)
DOI: 10.1115/1.4050503
See this article

On the Mechanical Behaviour of Biosourced Cellular Polymer Manufactured Using Fused Deposition Modelling

Sofiane Guessasma, Sofiane Belhabib, David Bassir, Hedi Nouri and Samuel Gomes
Polymers 12 (11) 2651 (2020)
DOI: 10.3390/polym12112651
See this article

A Bayesian experimental autonomous researcher for mechanical design

Aldair E. Gongora, Bowen Xu, Wyatt Perry, Chika Okoye, Patrick Riley, Kristofer G. Reyes, Elise F. Morgan and Keith A. Brown
Science Advances 6 (15) (2020)
DOI: 10.1126/sciadv.aaz1708
See this article

Smart Additive Manufacturing: The Path to the Digital Value Chain

Nuno Araújo, Vânia Pacheco and Leonardo Costa
Technologies 9 (4) 88 (2021)
DOI: 10.3390/technologies9040088
See this article

An optimisation framework for designs for additive manufacturing combining design, manufacturing and post-processing

Anton Wiberg, Johan Persson and Johan Ölvander
Rapid Prototyping Journal 27 (11) 90 (2021)
DOI: 10.1108/RPJ-02-2021-0041
See this article

Spatiotemporal Projection‐Based Additive Manufacturing: A Data‐Driven Image Planning Method for Subpixel Shifting in a Split Second

Chi Zhou, Han Xu and Yong Chen
Advanced Intelligent Systems 3 (12) 2100079 (2021)
DOI: 10.1002/aisy.202100079
See this article

Monsuru Ramoni, Ragavanantham Shanmugam, N. Thangapandian and M. Vishnuvarthanan
57 (2022)
DOI: 10.1007/978-3-030-89401-6_3
See this article

Hygrothermal and Microstructural Investigation of PLA and PLA-Flax Printed Structures

Yassine Elias Belarbi, Ferhat Benmahiddine, Ameur El Amine Hamami, Sofiane Guessasma and Sofiane Belhabib
Fibers 10 (3) 24 (2022)
DOI: 10.3390/fib10030024
See this article

Corrosion of nickel-based alloys fabricated through additive manufacturing: a review

Siddhi Mehta, Swarn Jha and Hong Liang
Progress in Additive Manufacturing (2022)
DOI: 10.1007/s40964-022-00298-3
See this article