Challenges of additive manufacturing technologies from an optimisation perspective
Int. J. Simul. Multisci. Des. Optim., 6 (2015) A9
Published online: 2016-01-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Multi-source data fusion monitoring system for super-elevation in laser powder bed fusion based on bi-stream cross-mode fusion network
Yingjie Zhang, Canneng Fang, Jiong Zhang, Gang Chen, Zhangdong Chen, Honghong Du, Lang Cheng and Di WangOptics and Lasers in Engineering 186 108794 (2025)
https://doi.org/10.1016/j.optlaseng.2024.108794
A Review of Optimization of Additively Manufactured 316/316L Stainless Steel Process Parameters, Post-Processing Strategies, and Defect Mitigation
Usman Aziz, Marion McAfee, Ioannis Manolakis, Nick Timmons and David TormeyMaterials 18 (12) 2870 (2025)
https://doi.org/10.3390/ma18122870
131 (2025)
https://doi.org/10.4018/979-8-3373-0533-2.ch006
159 (2025)
https://doi.org/10.4018/979-8-3373-0533-2.ch007
Investigating slicing parameters in FFF for time and mass estimation: a statistical approach
Antonio Bacciaglia, Alessandro Ceruti and Alfredo LiveraniProgress in Additive Manufacturing (2025)
https://doi.org/10.1007/s40964-024-00875-8
Optimization of 3D-printed reinforced concrete beams with four types of reinforced patterns and different distances
Mohammad Hematibahar, Amirali Milani, Roman Fediuk, Mugahed Amran, Amir Bakhtiary, Makhmud Kharun and Mir Sharif MousaviEngineering Failure Analysis 168 109096 (2025)
https://doi.org/10.1016/j.engfailanal.2024.109096
TECHNOLOGY OF ADDITIVE MANUFACTURING: A COMPREHENSIVE REVIEW
Md. Imam Hossain, Md. Sakib Khan, Imrul Kayes Khan, Khan Rajib Hossain, Yanzhao He and Xiaolong WangKufa Journal of Engineering 15 (1) 108 (2024)
https://doi.org/10.30572/2018/kje/150108
The Effects of Manufacturing Techniques on the Mechanical Performance of an Auxetic Structure Manufactured by Fused Filament Fabrication and Multijet Fusion Processes
Amer Alomarah, Abdalameer Tariq Abbas, Batool Faisal, Zizhao Peng and Dong RuanAdvanced Engineering Materials 26 (7) (2024)
https://doi.org/10.1002/adem.202302033
Recent challenges and advances in metal additive manufacturing: A review
K. Raghavendra Pai, Vijeesh Vijayan and K. Narayan PrabhuMaterials Today: Proceedings (2024)
https://doi.org/10.1016/j.matpr.2024.05.008
Synergistic reinforcement of nanofillers in biocomposites developed by additive manufacturing techniques
Jalaparthi Sai Krishna, Vijay Chaudhary, Jimmy Mehta, Paridhi Malhotra, Sumit Gupta and Pallav GuptaBiomass Conversion and Biorefinery 14 (13) 13691 (2024)
https://doi.org/10.1007/s13399-022-03395-z
Design, analysis and optimization of porous titanium alloys scaffolds by using additive manufacture
Xue Yang, Xiujuan Song, Guoliang Zhang, Shubo Xu, Wenming Wang, Kangwei Sun, Xiquan Ma, Siyu Sun, Yuefei Pan, Jianing Li, Guocheng Ren, Weihai Zhang, Kanak Kalita, Ranjan Kumar Ghadai and Paulo DavimInternational Journal for Simulation and Multidisciplinary Design Optimization 15 16 (2024)
https://doi.org/10.1051/smdo/2024013
Product Development Processes for Individualized Products: A Case Study
Faruk Civelek, Alexander Brem, Karl-Peter Fritz and André ZimmermannIEEE Transactions on Engineering Management 1 (2024)
https://doi.org/10.1109/TEM.2023.3277019
Digital Light Processing Route for 3D Printing of Acrylate-Modified PLA/Lignin Blends: Microstructure and Mechanical Performance
Sofiane Guessasma, Nicolas Stephant, Sylvie Durand and Sofiane BelhabibPolymers 16 (10) 1342 (2024)
https://doi.org/10.3390/polym16101342
Effect of the Printing Angle on the Microstructure and Tensile Performance of Iron-Reinforced Polylactic Acid Composite Manufactured Using Fused Filament Fabrication
Sofiane Guessasma and Sofiane BelhabibJournal of Manufacturing and Materials Processing 8 (2) 65 (2024)
https://doi.org/10.3390/jmmp8020065
Induced alterations driven compromised structural properties in additively manufactured products
Lida Haghnegahdar, Sameehan S. Joshi, Rohith Yanambaka Venkata, Daniel A. Riley and Narendra B. DahotreRapid Prototyping Journal 30 (4) 711 (2024)
https://doi.org/10.1108/RPJ-07-2023-0236
Numerical Analysis and Experimental Investigation of High Cycle Fatigue Behavior in Additively Manufactured Ti–6Al–4V Alloy
Djamel Remache, Florimont Dadouaille, Solene Lhabitant, Didier Falandry, Alain Toufine, Musaddiq Al Ali and Guillaume CohenBuildings 13 (8) 2011 (2023)
https://doi.org/10.3390/buildings13082011
Machine learning to optimize additive manufacturing for visible photonics
Andrew Lininger, Akeshi Aththanayake, Jonathan Boyd, Omar Ali, Madhav Goel, Yangheng Jizhe, Michael Hinczewski and Giuseppe StrangiNanophotonics 12 (14) 2767 (2023)
https://doi.org/10.1515/nanoph-2022-0815
Use of welding additive technologies in manufacture of metal parts of a complex shape (Review)
A.S. Novodranov, D.D. Topchev, A.M. Mangold, E.V. Shapovalov and V.O. KolyadaAvtomatičeskaâ svarka (Kiev) 2023 (1) 16 (2023)
https://doi.org/10.37434/as2023.01.03
Drug delivery and testing via 3D printing
Virender Kumar, Harmanpreet Kaur, Anuradha Kumari, Goldy Hooda, Vandana Garg and Harish DurejaBioprinting 36 e00298 (2023)
https://doi.org/10.1016/j.bprint.2023.e00298
3D printing in materials manufacturing industry: A realm of Industry 4.0
Tariku Sinshaw Tamir, Gang Xiong, Zhen Shen, Jiewu Leng, Qihang Fang, Yong Yang, Jingchao Jiang, Ehtisham Lodhi and Fei-Yue WangHeliyon 9 (9) e19689 (2023)
https://doi.org/10.1016/j.heliyon.2023.e19689
Efficient toolpath planning for collaborative material extrusion machines
Antonio Bacciaglia and Alessandro CerutiRapid Prototyping Journal 29 (9) 1814 (2023)
https://doi.org/10.1108/RPJ-09-2022-0320
51 (2023)
https://doi.org/10.1007/978-3-031-32927-2_5
Topology optimization methods for additive manufacturing: a review
Issam El Khadiri, Maria Zemzami, Nhan-Quy Nguyen, Mohamed Abouelmajd, Nabil Hmina and Soufiane BelhouidegInternational Journal for Simulation and Multidisciplinary Design Optimization 14 12 (2023)
https://doi.org/10.1051/smdo/2023015
111 (2023)
https://doi.org/10.1016/B978-0-323-99626-6.00002-0
3D Printing of Nanoceramics: Present Status and Future Perspectives
Mainak SahaSSRN Electronic Journal (2023)
https://doi.org/10.2139/ssrn.4388983
Corrosion of nickel-based alloys fabricated through additive manufacturing: a review
Siddhi Mehta, Swarn Jha and Hong LiangProgress in Additive Manufacturing 7 (6) 1257 (2022)
https://doi.org/10.1007/s40964-022-00298-3
Three-Dimensional Printing of Cylindrical Nozzle Elements of Bernoulli Gripping Devices for Industrial Robots
Roman Mykhailyshyn, František Duchoň, Mykhailo Mykhailyshyn and Ann Majewicz FeyRobotics 11 (6) 140 (2022)
https://doi.org/10.3390/robotics11060140
2460 040003 (2022)
https://doi.org/10.1063/5.0095646
Innovations in Additive Manufacturing
Monsuru Ramoni, Ragavanantham Shanmugam, N. Thangapandian and M. VishnuvarthananSpringer Tracts in Additive Manufacturing, Innovations in Additive Manufacturing 57 (2022)
https://doi.org/10.1007/978-3-030-89401-6_3
The Orientation Effect of the Solid-Tracks on the Mechanical Properties of Ti-6al-4v Alloy Manufactured by Directed Energy Deposition
Djamel Remache, Florimont Badouaille, Solene Lhabitant, et al.SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.3998967
Prediction of High-Cycle Fatigue Strength of Ti-6Al-4V Manufactured by the DED Process, Sensitivity to Surface Roughness and Ultimate Tensile Strength
Djamel Remache, Florimont Badouaille, Solene Lhabitant, et al.SSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.3998966
Mechanical and Thermal Properties of 3D Printed Polycarbonate
Anis Bahar, Sofiane Belhabib, Sofiane Guessasma, Ferhat Benmahiddine, Ameur El Amine Hamami and Rafik BelarbiEnergies 15 (10) 3686 (2022)
https://doi.org/10.3390/en15103686
Simultaneous optimization of structural topology and build direction using B-spline parameterized density method
Che Wang, Jihong Zhu and Weihong ZhangStructural and Multidisciplinary Optimization 65 (11) (2022)
https://doi.org/10.1007/s00158-022-03422-7
Polymer-Based Materials Built with Additive Manufacturing Methods for Orthopedic Applications: A Review
Kunal Manoj Gide, Sabrina Islam and Z. Shaghayegh BagheriJournal of Composites Science 6 (9) 262 (2022)
https://doi.org/10.3390/jcs6090262
High-Performance Composite Structures
Geetha Palani and Karthik KannanComposites Science and Technology, High-Performance Composite Structures 1 (2022)
https://doi.org/10.1007/978-981-16-7377-1_1
Hygrothermal and Microstructural Investigation of PLA and PLA-Flax Printed Structures
Yassine Elias Belarbi, Ferhat Benmahiddine, Ameur El Amine Hamami, Sofiane Guessasma and Sofiane BelhabibFibers 10 (3) 24 (2022)
https://doi.org/10.3390/fib10030024
Synthesis of a Starchy Photosensitive Material for Additive Manufacturing of Composites Using Digital Light Processing
Sofiane Guessasma, Sofiane Belhabib, Ferhat Benmahiddine, Ameur El Amine Hamami and Sylvie DurandMolecules 27 (17) 5375 (2022)
https://doi.org/10.3390/molecules27175375
Additive Manufacturing and Characterisation of Biomedical Materials
Mainak SahaSSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4084064
1 (2022)
https://doi.org/10.4271/2022-01-5106
Spatiotemporal Projection‐Based Additive Manufacturing: A Data‐Driven Image Planning Method for Subpixel Shifting in a Split Second
Chi Zhou, Han Xu and Yong ChenAdvanced Intelligent Systems 3 (12) (2021)
https://doi.org/10.1002/aisy.202100079
Additive manufacturing of ceramics and cermets: present status and future perspectives
Mainak Saha and Manab MallikSādhanā 46 (3) (2021)
https://doi.org/10.1007/s12046-021-01685-2
167 (2021)
https://doi.org/10.1109/ICIEA52957.2021.9436729
2319 020007 (2021)
https://doi.org/10.1063/5.0036113
Smart Additive Manufacturing: The Path to the Digital Value Chain
Nuno Araújo, Vânia Pacheco and Leonardo CostaTechnologies 9 (4) 88 (2021)
https://doi.org/10.3390/technologies9040088
An optimisation framework for designs for additive manufacturing combining design, manufacturing and post-processing
Anton Wiberg, Johan Persson and Johan ÖlvanderRapid Prototyping Journal 27 (11) 90 (2021)
https://doi.org/10.1108/RPJ-02-2021-0041
Additive Manufacturing of a Release Agent Injection Manifold for Hot Forging
Hak-Sung Lee, Min-Kyo Jung, Eun-ah Kim, et al.Journal of the Korean Society for Precision Engineering 38 (9) 675 (2021)
https://doi.org/10.7736/JKSPE.021.065
Topology optimization of self-supporting structures for additive manufacturing with B-spline parameterization
Che Wang, Weihong Zhang, Lu Zhou, Tong Gao and Jihong ZhuComputer Methods in Applied Mechanics and Engineering 374 113599 (2021)
https://doi.org/10.1016/j.cma.2020.113599
Semi-supervised Monitoring of Laser powder bed fusion process based on acoustic emissions
Vigneashwara Pandiyan, Rita Drissi-Daoudi, Sergey Shevchik, et al.Virtual and Physical Prototyping 16 (4) 481 (2021)
https://doi.org/10.1080/17452759.2021.1966166
A Review on Corrosion and Wear of Additively Manufactured Alloys
Peter Renner, Swarn Jha, Yan Chen, et al.Journal of Tribology 143 (5) (2021)
https://doi.org/10.1115/1.4050503
Low-Roughness-Surface Additive Manufacturing of Metal-Wire Feeding with Small Power
Bobo Li, Bowen Wang, Greg Zhu, Lijuan Zhang and Bingheng LuMaterials 14 (15) 4265 (2021)
https://doi.org/10.3390/ma14154265
Additive Manufacturing: Post Processing Methods and Challenges
Prithu Mishra, Shruti Sood, Mayank Pandit and Pradeep KhannaAdvanced Engineering Forum 39 21 (2021)
https://doi.org/10.4028/www.scientific.net/AEF.39.21
Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products
K. Abouzaid, D. Bassir, S. Guessasma and H. YueMechanics of Composite Materials 56 (6) 805 (2021)
https://doi.org/10.1007/s11029-021-09925-6
On the Mechanical Behaviour of Biosourced Cellular Polymer Manufactured Using Fused Deposition Modelling
Sofiane Guessasma, Sofiane Belhabib, David Bassir, Hedi Nouri and Samuel GomesPolymers 12 (11) 2651 (2020)
https://doi.org/10.3390/polym12112651
Enhancement of pool boiling heat transfer using 3D-printed polymer fixtures
Ahmed Elkholy and Roger KempersExperimental Thermal and Fluid Science 114 110056 (2020)
https://doi.org/10.1016/j.expthermflusci.2020.110056
Additive Manufacturing Hybrid Processes for Composites Systems
Telmo G. Santos, J. P. Oliveira, Miguel A. Machado, et al.Advanced Structured Materials, Additive Manufacturing Hybrid Processes for Composites Systems 129 265 (2020)
https://doi.org/10.1007/978-3-030-44522-5_8
ARIMA-GMDH: a low-order integrated approach for predicting and optimizing the additive manufacturing process parameters
Osama Aljarrah, Jun Li, Wenzhen Huang, Alfa Heryudono and Jing BiThe International Journal of Advanced Manufacturing Technology 106 (1-2) 701 (2020)
https://doi.org/10.1007/s00170-019-04315-8
Design for additive manufacturing process for a lightweight hydraulic manifold
Olaf Diegel, Juan Schutte, Arno Ferreira and Yuk Lun ChanAdditive Manufacturing 36 101446 (2020)
https://doi.org/10.1016/j.addma.2020.101446
A Bayesian experimental autonomous researcher for mechanical design
Aldair E. Gongora, Bowen Xu, Wyatt Perry, Chika Okoye, Patrick Riley, Kristofer G. Reyes, Elise F. Morgan and Keith A. BrownScience Advances 6 (15) (2020)
https://doi.org/10.1126/sciadv.aaz1708
Full-Density Fused Deposition Modeling Dimensional Error as a Function of Raster Angle and Build Orientation: Large Dataset for Eleven Materials
Sherri L. Messimer, Tais Rocha Pereira, Albert E. Patterson, Maliha Lubna and Fabiano O. DrozdaJournal of Manufacturing and Materials Processing 3 (1) 6 (2019)
https://doi.org/10.3390/jmmp3010006
Wire Arc Additive Manufacturing of Mn4Ni2CrMo Steel: Comparison of Mechanical and Metallographic Properties of PAW and GMAW
Teresa Artaza, Alfredo Suárez, Maialen Murua, et al.Procedia Manufacturing 41 1071 (2019)
https://doi.org/10.1016/j.promfg.2019.10.035
Deep Learning for In Situ and Real-Time Quality Monitoring in Additive Manufacturing Using Acoustic Emission
Sergey A. Shevchik, Giulio Masinelli, Christoph Kenel, Christian Leinenbach and Kilian WasmerIEEE Transactions on Industrial Informatics 15 (9) 5194 (2019)
https://doi.org/10.1109/TII.2019.2910524
Additive Manufacturing of Emerging Materials
Eskandar Fereiduni, Mostafa Yakout and Mohamed ElbestawiAdditive Manufacturing of Emerging Materials 55 (2019)
https://doi.org/10.1007/978-3-319-91713-9_3
Innovative setup for cryogenic mechanical testing of high-strength metallic alloys
Maria Tufano, Christoph Zauner and Alexander MoraschCEAS Space Journal 11 (3) 241 (2019)
https://doi.org/10.1007/s12567-019-0239-7
Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance
Sofiane Guessasma, Sofiane Belhabib and Hedi NouriPolymer Testing 77 105924 (2019)
https://doi.org/10.1016/j.polymertesting.2019.105924
Shape and topology optimization considering anisotropic features induced by additive manufacturing processes
Charles Dapogny, Rafael Estevez, Alexis Faure and Georgios MichailidisComputer Methods in Applied Mechanics and Engineering 344 626 (2019)
https://doi.org/10.1016/j.cma.2018.09.036
Recent Problems of Heat-Transfer Simulation in Technological Processes of Selective Laser Melting and Fusion
S. I. Zhavoronok, A. S. Kurbatov, L. N. Rabinskiy and Yu. O. SolyaevHigh Temperature 57 (6) 916 (2019)
https://doi.org/10.1134/S0018151X19060178
Experimental Characterization of SLM and EBM Cubic Lattice Structures for Lightweight Applications
G. De Pasquale, F. Luceri and M. RiccioExperimental Mechanics 59 (4) 469 (2019)
https://doi.org/10.1007/s11340-019-00481-8
Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling
Sofiane Guessasma, Sofiane Belhabib and Hedi NouriPolymers 11 (7) 1220 (2019)
https://doi.org/10.3390/polym11071220
Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
Sofiane Guessasma, Sofiane Belhabib and Hedi NouriPolymers 11 (11) 1778 (2019)
https://doi.org/10.3390/polym11111778
Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
Sofiane Guessasma, Sofiane Belhabib and Hedi NouriMacromolecular Materials and Engineering 304 (7) (2019)
https://doi.org/10.1002/mame.201800793
Macro- and micro-structure designs for porous sound absorbers
Keith AttenboroughApplied Acoustics 145 349 (2019)
https://doi.org/10.1016/j.apacoust.2018.10.018
Integrated component-support topology optimization for additive manufacturing with post-machining
Matthijs LangelaarRapid Prototyping Journal 25 (2) 255 (2019)
https://doi.org/10.1108/RPJ-12-2017-0246
Simulation and validation of thermography inspection for components produced by additive manufacturing
Marta S. Carvalho, Ana P. Martins and Telmo G. SantosApplied Thermal Engineering 159 113872 (2019)
https://doi.org/10.1016/j.applthermaleng.2019.113872
Design for additive manufacturing – a review of available design methods and software
Anton Wiberg, Johan Persson and Johan ÖlvanderRapid Prototyping Journal 25 (6) 1080 (2019)
https://doi.org/10.1108/RPJ-10-2018-0262
Additive Manufacturing with Bioinspired Sustainable Product Design: A Conceptual Model
Hao Zhang, Jacquelyn K. Nagel, Abdulrahman Al-Qas, Evan Gibbons and Jenifer Joo-Yeon LeeProcedia Manufacturing 26 880 (2018)
https://doi.org/10.1016/j.promfg.2018.07.113
Review on Three-Dimensionally Emulated Fiber-Embedded Lactic Acid Polymer Composites: Opportunities in Engineering Sector
Nikit Deoray and Balasubramanian KandasubramanianPolymer-Plastics Technology and Engineering 57 (9) 860 (2018)
https://doi.org/10.1080/03602559.2017.1354226
Functionally graded materials from topology optimisation and stereolithography
Tao Liu, Sofiane Guessasma, Jihong Zhu, Weihong Zhang and Sofiane BelhabibEuropean Polymer Journal 108 199 (2018)
https://doi.org/10.1016/j.eurpolymj.2018.08.038
Fully resolved numerical simulations of fused deposition modeling. Part I: fluid flow
Huanxiong Xia, Jiacai Lu, Sadegh Dabiri and Gretar TryggvasonRapid Prototyping Journal 24 (2) 463 (2018)
https://doi.org/10.1108/RPJ-12-2016-0217
The role of additive technologies in the prototyping issues of design
Monica Carfagni, Lorenzo Fiorineschi, Rocco Furferi, Lapo Governi and Federico RotiniRapid Prototyping Journal 24 (7) 1101 (2018)
https://doi.org/10.1108/RPJ-02-2017-0021
Modeling of Layer-wise Additive Manufacturing for Part Quality Prediction
Jianjing Zhang, Peng Wang and Robert X. GaoProcedia Manufacturing 16 155 (2018)
https://doi.org/10.1016/j.promfg.2018.10.165
Controlling the extrudate swell in melt extrusion additive manufacturing of 3D scaffolds: a designed experiment
Azizeh-Mitra Yousefi, Byran Smucker, Alex Naber, et al.Journal of Biomaterials Science, Polymer Edition 29 (3) 195 (2018)
https://doi.org/10.1080/09205063.2017.1409022
A Review of Metal Additive Manufacturing Technologies
Mostafa Yakout, M.A. Elbestawi and Stephen C. VeldhuisSolid State Phenomena 278 1 (2018)
https://doi.org/10.4028/www.scientific.net/SSP.278.1
Schiff base-assisted surface patterning of polylactide–zinc oxide films: generation, characterization and biocompatibility evaluation
R. Rarima, R. Asaletha and G. UnnikrishnanJournal of Materials Science 53 (14) 9943 (2018)
https://doi.org/10.1007/s10853-018-2338-9
A new 3D printing method based on non-vacuum electron beam technology
Shuhe Chang, Stefan Gach, Aleksej Senger, Haoyu Zhang and Dong DuJournal of Physics: Conference Series 1074 012017 (2018)
https://doi.org/10.1088/1742-6596/1074/1/012017
On the characterization of stainless steel 316L parts produced by selective laser melting
Mostafa Yakout, M. A. Elbestawi and Stephen C. VeldhuisThe International Journal of Advanced Manufacturing Technology 95 (5-8) 1953 (2018)
https://doi.org/10.1007/s00170-017-1303-0
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A.M. Tofail, Elias P. Koumoulos, Amit Bandyopadhyay, et al.Materials Today 21 (1) 22 (2018)
https://doi.org/10.1016/j.mattod.2017.07.001
3D printing of kaolinite clay ceramics using the Direct Ink Writing (DIW) technique
Carlos F. Revelo and Henry A. ColoradoCeramics International 44 (5) 5673 (2018)
https://doi.org/10.1016/j.ceramint.2017.12.219
Implementation of Non-Destructive Evaluation and Process Monitoring in DLP-based Additive Manufacturing
Iaroslav Kovalenko, Sylvain Verron, Maryna Garan, Jiří Šafka and Michal MoučkaOpen Engineering 7 (1) 100 (2017)
https://doi.org/10.1515/eng-2017-0016
Additive Manufacturing, Cloud-Based 3D Printing and Associated Services—Overview
Felix Baumann and Dieter RollerJournal of Manufacturing and Materials Processing 1 (2) 15 (2017)
https://doi.org/10.3390/jmmp1020015
Applications of non-destructive testing techniques for post-process control of additively manufactured parts
Q. Y. Lu and C. H. WongVirtual and Physical Prototyping 12 (4) 301 (2017)
https://doi.org/10.1080/17452759.2017.1357319
1 (2017)
https://doi.org/10.1109/RTSI.2017.8065965
The manufacture of honeycomb cores using Fused Deposition Modeling
David Pollard, C. Ward, G. Herrmann and J. EtchesAdvanced Manufacturing: Polymer & Composites Science 3 (1) 21 (2017)
https://doi.org/10.1080/20550340.2017.1306337
Additive manufacturing of metal products (Review)
V.V. Zhukov, G.M. Grigorenko and V.A. ShapovalovАвтоматическая сварка 2016 (6) 148 (2016)
https://doi.org/10.15407/as2016.06.24